[carolpa]

Do you use Audirvana Studio or Audirvana 3.5?

note: both can stream directly to the BL28.

And you can change the stream-to-device in the Audirvana remote app also. So you do not have to change the setting in your Mac every time.

[carolpa]

Note: you can stream from Audirvana to your Beolab 28 directly also.

Just set the BL28 as output.

[carolpa]

you need:

1. Beoliving blackbox + sw upgrade to Pro (see website of Khimo)
2. Halo (of course)

this will open doors to extended home automation

[carolpa]

for the interested………
I got similar Macros for Link/Join devices and for setting devices to Standby.

Let it know and I will make them accessible.

[carolpa]

You didn’t setup your network correctly, I would say.
I have an access point and the router itself. Both Wifi senders/receivers are on. Both have a different name. But both are with all B&o devices in the same subnetwork. All must be in the same (sub)network to work correctly.

If I connect my iPhone to the AP or to the Router, the accessibility to all B&o devices stay the same.

Did you create different subnetworks one for every AP?

[Author]

Posts