mexking

Forum Replies Created

Viewing 20 posts - 41 through 60 (of 67 total)
  • Author
    Posts
  • in reply to: Which Beogram turntable #38873
    mexking
    BRONZE Member

    I have restored various BGs from BG 1000 to BG 4002 and BG 5000. From a mechanical point of view I recommend the BG 5000, I bought that one 12 years ago, opened it up and cleaned and lubricated it, checked all adjustment and it has been my daily used BG nearly ever since. IMO the best build BG I have come across, build like a tractor. I use a MMC 2 on it. The difference to a MMC 4 is clearly hear able. Its the only BG I have had that I could store for a couple of years, take it out. connect it and run it without any problems.

    Location: Mexico city
    in reply to: BeoGram 1000: alternative RIAA PreAmp ? #36576
    mexking
    BRONZE Member

    There are apparently at least 2 different versions, one with OA81 and one with OA70 fitted. The OA81 has the smaller caps and different transistors fitted, yours and my pic of the PCB are identical, whereas your trace with components pic is different. So you will have to decide which one you want to copy.

    @ Martin, I remember the RIAA, the BG 1000 is still going strong playing with my son in CPH together with the BM 1900 you also restored connected now to some Sonos equipment, but let the young ones play around. I would here put a big smiley if I could

    Location: Mexico city
    in reply to: BeoGram 1000: alternative RIAA PreAmp ? #36573
    mexking
    BRONZE Member

    Component list

    Compo list

    Location: Mexico city
    in reply to: BeoGram 1000: alternative RIAA PreAmp ? #36572
    mexking
    BRONZE Member

    Try Mouser Electronics, but you will have to go for radial leaded caps in some cases, looking at the PCB you should be able to fit them. start looking for 80/25 if not there, look for 82/25 and so on just keep it inside the 20%. If you dont find it check with Martin, I know he has some of them if not all. I will go check in my stock I have 80 and 100 axial in stock but dont remember which V

    Location: Mexico city
    in reply to: BeoGram 1000: alternative RIAA PreAmp ? #36571
    mexking
    BRONZE Member

    here

    Drawing

    Location: Mexico city
    in reply to: BeoGram 1000: alternative RIAA PreAmp ? #36567
    mexking
    BRONZE Member

    Diodes 3 and 4 in the drawing is OA 81 and in your trace pic OA 70. I dont know which one is the correct one

    Location: Mexico city
    in reply to: Speakers factory tuning according to design options #36946
    mexking
    BRONZE Member

    Hi Matador, compliment to your design, I am more to keeping it original, but I do like the look of it. You mentioned that you are half deaf (me too) and listening to MP3 and the like, so sound vise there will be no problems but maybe the speakers will be more directional, you will have to check that.

    Soren

    Location: Mexico city
    in reply to: BeoGram 1000 Pre-Amp PCB: what are the dimensions? #36659
    mexking
    BRONZE Member

    Notches 2.5 mm

    Location: Mexico city
    in reply to: BeoGram 1000 Pre-Amp PCB: what are the dimensions? #36657
    mexking
    BRONZE Member

    Your trace pic is view from component side, here my pic from solder side, black dots are ground (neg.) connections

    20220808_130204

    Location: Mexico city
    in reply to: BeoGram 1000 Pre-Amp PCB: what are the dimensions? #36653
    mexking
    BRONZE Member

    Dimensions all mm.

    BG 1000 prea

    Location: Mexico city
    in reply to: Beogram 5000 plays slloowww #36409
    mexking
    BRONZE Member

    Where did you buy your belt, most belts  bought on the bay are worthless

    Location: Mexico city
    in reply to: Beogram 1000 noise #35716
    mexking
    BRONZE Member

    Probably a capacitor problem in the Beomaster as the problem is both channels. If the Beogram has a preamp the problem could also be there. If playing a radio station, do you have the same problem ?

    Location: Mexico city
    in reply to: New to me Beomaster 5000…Help please #34957
    mexking
    BRONZE Member

    As Matador says, and get the manual and READ it, good luck

    Location: Mexico city
    in reply to: Your latest addi(c)tion? #34877
    mexking
    BRONZE Member

    Nice one Dennis, happy desmoking, Henrik did you get my mail ?

    Location: Mexico city
    in reply to: Beolab 5000 Type 5303 #34489
    mexking
    BRONZE Member

    BC141 should be OK too

    Location: Mexico city
    in reply to: Beolab 5000 (1967) – US version Type 5305 #34390
    mexking
    BRONZE Member

    But a different AC selector

    P1020631 (2021_01_16 19_18_46 UTC)

    Location: Mexico city
    in reply to: Beolab 5000 (1967) – US version Type 5305 #34389
    mexking
    BRONZE Member

    Hi Frede, I had the same (sold it to Jeff in Canada), probably the US version as I bought it on the US bay only 35 production numbers apart, and the same controller KH

    P1020459 (2021_01_16 19_18_46 UTC)

    Location: Mexico city
    in reply to: Beomaster 5000 #33945
    mexking
    BRONZE Member

    Keep them coming, I like your work, think about chancing the Fairchild (black drop) transistors, Frede, Classic Audio recommend changing them

    Location: Mexico city
    in reply to: Today’s flea market find. #34256
    mexking
    BRONZE Member

    Good find, congrats

    Location: Mexico city
    in reply to: Where are my PMs? #34235
    mexking
    BRONZE Member

    https://archivedforum2.beoworld.org/forums/t/11357.aspx?PageIndex=4

    My threads has pics from “my files” I tried several threads and no pics showing

    Location: Mexico city
Viewing 20 posts - 41 through 60 (of 67 total)