[Leosgonewild]

shiddy soldering.

[Leosgonewild]

I have the Google VYUDCFDX3VF8H mesh with two mesh points. Works flawlessly.

[Leosgonewild]

Is that just a frosted glass with a short throw projector behind it?

 

And what is the point of that kind of screen?

[Leosgonewild]

I had the same issue. It started the calibration process, but it would just do the two or three first low frequencies before it aborted.

I swapped the microphones, and the issue was duplicated to the other speaker.

I did however have a failing chassis also (the midrange had no sound), so I ended up with a chase swap and a new microphone.

Now the fugged up thing with this is that they are MK1. One speaker had already had a chase repair (swap), and the geniuses at the factory in Denmark had replaced it with a MK3-chassie. So now I am running one Mk1 speaker with software 1.6x, and a MK3 with software 3.6x

So what messes up this now is that when they are off, the MK1 stays red, but the MK3 goes completely off after a few seconds.

Only fix is to downgrade the MK3 to 2.6x

[Leosgonewild]

Very impressive!

how do they sound?

[Leosgonewild]

The Beograms are literally in standing in the closet. I did not mean to make a joke.

[Leosgonewild]

I have a few Beogram 4002’s in the closet. Maybe I should make a 2SLHBTQA+ version? Just jam all the colors onto it.

[Leosgonewild]

Kirin, my system is driven by a Denon x4700h

I have a 7.0.4 system

[Leosgonewild]

buy a Oled tv. Not Samsung qled.
I have a LG C9 65” mounted on a Beovision stand.
very happy with it.

 

don’t mind the cabeling in the picture.

[Leosgonewild]

A8 is 2.4 ghz. Is your new network only running 5ghz maybe?

 

 

[Leosgonewild]

I still swear a lot every time I am setting up something in google home.

Is chromecast activated on both speakers?

I’d be willing to have a call with him to help him try to solve it.

[Leosgonewild]

Are they added to the same room?

[Leosgonewild]

I have been dreaming of this for 10 years…

 

[Leosgonewild]

I just finished restoring this.

[Leosgonewild]

Is there any damage to your original metal strip? It is easy to remove with some heat. Then it can be attached to the new lid.

[Leosgonewild]

Yes, you just need google home to set it up. After that the stereo pair will show as a chromecast device.

[Leosgonewild]

Yes, they can be stereo paired in google home.
you can also have multiple stereo pairs in a speaker group.

[Leosgonewild]

Thanks for solving my problem (or lack of error searching skills), Geoff ?

[Leosgonewild]

I tried to lay the speaker on its back. Still same scratching.
I took it off, and when I press it down with my fingers, I can’t reproduce it.
Considering to cut off the dust cap and use some air pressure.

As you can see from the pictures I doubt that I can source the driver.

 

Thanks for the welcome back ?

And now for the million dollar question:

what song was I listening to when I noticed the issue?

 

[Leosgonewild]

I can`t figure out how to send you this picture in a PM. But feel free to use this picture in your writeup. (and also delete our comments after it)

 

[Author]

Posts