Forum Replies Created
-
Interestingly on Windows XP the driver is the same as you have. Whilst on Windows 10 it is a Beoport Driver and much later.
Location: Hampshire My B&O Icons:
Guy,
My Beoport PC N.Radio worked fine on Windows 10 until the last update, about 2 weeks ago. Since then, though N.Music works and linked sources from my Eclipse also play, N.Radio does not play a station. Installed on an old Windows XP laptop and on Windows xp virtual machine on Windows 10 it all works fine. So as you say a driver may need replacing or it is internal in the software using something that was unsupported and as now been replaced.
Paul
Location: Hampshire My B&O Icons:
Back in June 2018 I had to reinstall Beoport PC on a Windows 10 PC and it wouldn’t register. This was the response from B&O support at the time.
Actually, that service has been discontinued some time ago. So instead kindly follow the below procedure:
– Exit Beoport SW (rightclick icon in taskbar)
– Please download this file and doubleclick it: https://www.dropbox.com/s/42r2je36ibmujp0/N.Radio.reg?dl=0
– Start Beoport SWRegards Paul
Location: Hampshire My B&O Icons:
I had a Beovision 7 40 with a Beomaster 70000 connected to with a NL/ML Converter and could select sources and control volume on the Beovision 7 40.
Paul
Location: Hampshire My B&O Icons:
For the NL/ML set up I did the following, not sure this is the best way but it works.
I then followed the BeoRemote User Guide for the Beolink set up, in my case I did not see the link symbol against the source so I just see “Radio” not as in the picture.
This all seems to work well, I can select a source on the BM7000 with my Beo4 and it plays and I can control the volume or I can select the source using the Beoremote. I can also play audio from the Eclipse on my Beolab 3500, my Beovision 6 and Beolink PC2. The only problem I really have is not being able to choose a speaker group when in Beo4 Audio mode.
On my Beoremote I have a choice of “Lounge” my Eclipse or Beo4 Audio and choose which one.
Hope this helps.
Paul
Location: Hampshire My B&O Icons:
MM, taking your lead I played around with the settings and it all works! The dealer had spent a number of days talking to B&O who were adamant it wouldn’t work.
The only minor issue is that if I mute the Eclipse sound it also mutes the linked product.
Paul
Location: Hampshire My B&O Icons:
I can listen to sounds from the Eclipse on the Masterlink products and even switch it off but not the other way round!
Location: Hampshire My B&O Icons:
That’s what I thought but it doesn’t seem to work, pressing CD as shown above does nothing, how should the NL/ML Converter be set up?
Location: Hampshire My B&O Icons:
Sorry to reply in English but I have an Eclipse and a BM7000 and B&O told me that possibility 1 won’t work, the Eclipse NL doesn’t work that way so I have had to go with possibility 2 but sacrificing a BM7000 connection since AAux is used to connect to the Masterlink converter.
Paul
Location: Hampshire My B&O Icons:
Thanks for that, it was I thought but wanted to check. I thought the core had a USB-c power connection.
Location: Hampshire My B&O Icons:
Steve,
Thanks for this, I will contact you when I go ahead.
Have I misread the beolab 7.2 manual when is says “Mains connections The loudspeaker has two sockets concerning mains supply. The socket marked ~ is for mains supply input (connection from the wall outlet), and the other is a mains supply output to BeoVision 7 “, I thought I might be to power the core from here.
Location: Hampshire My B&O Icons:
