Page 19 – BeoWorld Forum

Forum Replies Created

Viewing 20 posts - 361 through 380 (of 383 total)

← 1 2 3 … 18 19 20 →

Author

Posts
8 July 2022 at 19:09 in reply to: 2nd hand Beocord 2000 Deluxe – Critical points to check #35788

YannChris
GOLD Member

Hi all,

I tested the set and bought it.

By chance, the heads are not worn out, so I can play the tapes.

But Chartz was right, idler wheels must be hard and the BeOcord sounds as a BOeing 🙂

As my project is to digitalize the tapes it is not so annoying.

By chance, the line-out works but the plug is wired in a strange way, as input and output pins seem to be reversed.

So to connect it to my Beocenter 9000, I have to fiddle with Din/RCA/Din adapters.

Tomorrow I’ll check the speaker outputs.

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

3 July 2022 at 17:33 in reply to: Help for BeoCenter 9000 tape. Update: it’s not the belt #35967

YannChris
GOLD Member

Hello Martin,

Thanks for the info, my mistake is corrected.

Do you have any clue for the remaining problems?

Does the reading of the tork-meter tape video shows something useful?

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

3 July 2022 at 14:02 in reply to: Help for BeoCenter 9000 tape. Update: it’s not the belt #35965

YannChris
GOLD Member

Update:

I exchanged the belt with a one bought to Dillen a few years ago but never used.

Unfortunately with no complete result : fluctuations while reading are gone but the other defects stay unchanged.

Any clue?

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

2 July 2022 at 19:03 in reply to: Help for BeoCenter 9000 tape. Update: it’s not the belt #35964

YannChris
GOLD Member

And did the videos give you other clues?

Location: Brittany, France
My B&O Icons:

2 July 2022 at 16:08 in reply to: Help for BeoCenter 9000 tape. Update: it’s not the belt #35962

YannChris
GOLD Member

Thanks Chartz,

I just had a look and these parts are for Beocord 9000 and I have a Beocenter 9000

Are you site they are adapted to my set?

Kind regards,

Yann

Location: Brittany, France
My B&O Icons:

2 July 2022 at 15:36 in reply to: Help for BeoCenter 9000 tape. Update: it’s not the belt #35960

YannChris
GOLD Member

Thanks Chartz,
What do you mean by tyres?

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

30 June 2022 at 18:26 in reply to: 2nd hand Beocord 2000 Deluxe – Critical points to check #35786

YannChris
GOLD Member

Thanks Chartz 🙂

The set is proposed at 60 Euros, I wonder if the risk/price ratio is good on such an old machine.

Regards,

Yann.

Location: Brittany, France
My B&O Icons:

30 June 2022 at 08:39 in reply to: 2nd hand Beocord 2000 Deluxe – Critical points to check #35784

YannChris
GOLD Member

Thanks Omminp,

I’ll check heads very carefully when I’ll test the set.

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

24 June 2022 at 07:26 in reply to: A question for Geoff Martin on BL8000 Damping… #34356

YannChris
GOLD Member

Not relevant reply, sorry.

Location: Brittany, France
My B&O Icons:

21 June 2022 at 11:36 in reply to: MMC20 Genetic manipulations… #35621

YannChris
GOLD Member

Thumbs up!

Location: Brittany, France
My B&O Icons:

21 June 2022 at 05:50 in reply to: Replacement for a dead BV7-40 #35446

YannChris
GOLD Member

Thanks Stotty,

I found the informations about 111 Services and will contact them.

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

20 June 2022 at 19:42 in reply to: Replacement for a dead BV7-40 #35444

YannChris
GOLD Member

Hi Stotty,

I’m in Brittany too, near Lorient.

Having some vintage products which need repair, would you tell me where did you send your TV for service?

Please, excuse my intrusion in your thread.

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

10 June 2022 at 20:08 in reply to: Beolink 5000 E-Ink screen repair / mod #34598

YannChris
GOLD Member

Hi,

I’m interested in this mod (check your Personal Messages).
Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

25 May 2022 at 20:04 in reply to: A question for Geoff Martin on BL8000 Damping… #34349

YannChris
GOLD Member

Beobuddy,

Are you talking of the new white foam or of the foam-tape?

Location: Brittany, France
My B&O Icons:

25 May 2022 at 19:53 in reply to: A question for Geoff Martin on BL8000 Damping… #34346

YannChris
GOLD Member

Thanks Beobuddy.

Aren’t you afraid that over time the foam will disintegrate and cause a new “Foam-Rot” crisis?

Location: Brittany, France
My B&O Icons:

25 May 2022 at 19:34 in reply to: A question for Geoff Martin on BL8000 Damping… #34344

YannChris
GOLD Member

Beobuddy,

On your picture, I notice that you replaced the foam-tape placed on the sides of the column.

Are they part of the foam-kit?

If not, what did you use?

Regards,

Yann.

Location: Brittany, France
My B&O Icons:

31 March 2022 at 18:21 in reply to: The BeoWorld Spring 2022 Prize Draw !!! #33722

YannChris
GOLD Member

Hi Botty,

Happy to see you back 🙂

Location: Brittany, France
My B&O Icons:

28 March 2022 at 16:40 in reply to: Activating a non B&O Power Amp via 5V Trigger Powerlink Signal #33583

YannChris
GOLD Member

Why not ask Steve?

https://soundsheavenly.com/

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

19 March 2022 at 18:27 in reply to: Thank You Keith – from Lee! #33253

YannChris
GOLD Member

Thank you Keith for your awesome work.

Kind regards,

Yann.

Location: Brittany, France
My B&O Icons:

19 March 2022 at 18:22 in reply to: Eclipse V1 screws #33098

YannChris
GOLD Member

Good idea Jean!

Location: Brittany, France
My B&O Icons:
Author

Posts