[pepps]

Guy wrote:

I updated my BV10-32 from 0.1.8.9 to 0.1.9.9 shortly after I bought it, but didn’t notice any improvements/changes. I vaguely remember seeing a thread somewhere about what the improvements were supposed to be, but can’t find it any more. I have no problem receiving HD programmes via terrestrial. Are you sure that the antenna is connected to the DVB-HD input, rather than the old analogue one?

The aerial is connected to the correct input. Just scanned again and no HD channels returned.

Unusually during tuning the screen shows provision to count up how many tv channels and how many radio channels have been located. This has always remained at zero for my BV throughout the tuning process.

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

Hello Guy,

Thanks for coming back to me.
A fair comment about connection – I have the aerial connected to the ‘middle’ socket. (Imagine the 3 aerial sockets in the diagonal line from inside to outside.)

I believe the one furthest in is for the analogue tv tuner, the middle one for terrestrial or cable and the one on the outside for satellite.

Dont tell me I’ve messed that up!! LOL! I’ll go an check.

Julian

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

Hi,

Did yu have any luck with your repair? I was wondering, if you were using the BM5500 to test the sound of the components perhaps it’s something to do with the CD input on the BM? Always worthwhile to try different sockets to rule out something unexpected.

Julian

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

@Evan Your ‘cubical’ at work looks utterly baffling! A full-on hifi in an office cubical? How can that even be?!?! (Looks for big smiling emoji)

A most stunning office set-up all the same, bravo!

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

Those chairs are superb!

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

<p style=”text-align: left;”>Hi,</p>
When you say ‘all inputs’ do you mean the DIN type sockets for connection of a Phono and/or Tape2? These are stereo inputs – much the same as with almost all other Beosystems of the time.

Julian

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

Wowzer! Fabulous set of microphones!

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[pepps]

This is a reply which I shall post and then look for the edit option.

This is text typed after I selected the edit option. Works fine.

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[Author]

Posts