Forum Replies Created
-
AuthorPosts
-
GOLD MemberShould not be hard to find in Denmark.
But the shipping costs would be gigantic, I guess.
Have a look on this site (equivalent to ebay in Denmark).
MM
Location: Flensborg————DanmarkVery well, yes!
I have done that for 30 years now.No going back…..it has gotten better and better – especially since I got the BS Theatre.
And, by the way – music is not limited to two channels (usually called stereo)……the more channels, the better ??????
MM
Location: Flensborg————DanmarkPlease send my regards to the ‘she’….getting rid of the door is an excellent idea.
The setup needs more room to ‘breathe’.
You (and ‘she’) won’t regret it!MM
Location: Flensborg————DanmarkMaybe 8s as front and 8000 as rear will perform better in the surround system , 80% sound come from L C R，and 8s is technically better than 8000
I’d second that…..didn’t you think of that?
I guess that would also be a better solution optically, since the setup is pretty squeezed in the front due to the placement.Only reason not to do so, could be that you’d have to have a PL cable running to the back.
That might be doable, though (?)
Otherweise you could use a Receiver 1 for WiSA connection to the BL8000 in the back.MM
Location: Flensborg————Danmark11 March 2024 at 10:52 in reply to: 3 generations of the B&O app – which one would you prefer? #50559While each version brought improvements, the latest iteration stands out. Its sleek interface, intuitive navigation, and seamless integration with B&O products make it my top choice. With enhanced functionality and a user-friendly design, it truly enhances my audio experience.
That could be a quote from an official B&O PR announcement!
Can you really ignore the flaws, that a lot of users have described?
However – if it is true in your case – no doubt, you are one of the very few content app users.
MM
Location: Flensborg————DanmarkDid you do a reset?
MM
Location: Flensborg————DanmarkIMO streaming via BT is a handy solution, when you e.g. have guests in the house and you are not interested in giving them the password for your home wifi network.
Streaming via Airplay or Chromecast / Deezer, Spotify Connect (or Tidal Connect) is the better solution.
MM
Location: Flensborg————Danmarkbut now I have a question :
I’ve been through eclipse settings , and beolab settings on app , and can find no setting for using the 19 sub with the 8s for music streaming .
is it possible to do this ?
or will the sub only turn on when the tv is on , and the 8s will only stream Bluetooth when tv is off ?
You can not add a sub to the BL8’s.
Only way is to make a Speaker Group with the BL8’s and the BL19 in the BV Eclipse – which means that the BV Eclipse will turn on for processing the sound.
You can not use the BL8’s for BT, when set up with the BL19 as a Speaker Group.As far as I remember you can stream via BT to the BV Eclipse directly and this way use the BL8/19 Speaker Group for listening.
MM
Location: Flensborg————DanmarkA lot of NL/ML Converter users have this question.
I haven’t heard of any explanation yet.MM
Location: Flensborg————DanmarkYou could use airplay and technically they will be fully in sync ?
That would be the most expensive Airplay device ever ?
MM
Location: Flensborg————DanmarkI’d say 2.
Keep it simple!
MM
Location: Flensborg————DanmarkMy only memory from such a job years ago was….back pain ?
MM
Location: Flensborg————DanmarkI guess that would be with the sliders in the middle position…..neutral value.
MM
Location: Flensborg————DanmarkHow about a “pair” of Theatres?
I know that this isn’t practical, but I’m curious if the software could handle this. (Hopefully this question isn’t too off-topic)
Glitch
This would be kind of like wanting to be the driver of two cars at the same time ?
MM
Location: Flensborg————DanmarkHi Mjoelnir
The BS Core has one input port, which is combined mini-jack analog and toslink.
In your case you will only need an adapter cable between the turntable and a male minijack connector.
There is no option to control the volume on a Beogram itself (the output is fixed) – this is done in the Core.
Once you have connected it there, the Core turns on to that input (i.e. autosense), when the turntable has started.
You can use the B&O app for volume controlling like with all other sources like B&O Radio etc.The turntable will show up as an AUX-connected device.
You will not be able to remote control the turntable (pause, play etc) – that must be done on the turntable.Alternatively you can control the volume with the Beoremote One, an Essence Remote or the Halo remote.
MM
Location: Flensborg————DanmarkYou can find a list of the ASE in this explanation of new and old way to use ‘Join’ here:
So yes, the Core is an ASE product.
ASE stands for ‘Audio Streaming Engine’ and was the first generation of the NL platform, which replaced the old ML platform.
There have been some minor updates of the ASE platform along the way.
MM
Location: Flensborg————Danmark29 February 2024 at 17:43 in reply to: 3 generations of the B&O app – which one would you prefer? #50556When comparing three generations of the B&O app, preference depends on individual needs and features offered. The latest version might have improved functionality and compatibility, while older versions could be more familiar or stable. Ultimately, the choice revolves around which version aligns best with personal preferences and requirements.
Of course you are right, that this is about ‘personal preferences and requirements’.
To me it seems like the makers of the current app have neglected the thought of backwards compatibility (something that otherweise always was important for B&O) with the new app version.
I do not see, where the new app brings ‘improved functionallity and compatibility’.
Actually there are several options/features missing – it seems like an unfinished product even now after quite a while.
Something that those with headphones etc and/or a setup with new (Mozart based) products may not miss or notice – but something that has made the daily use of the setups of many a long time B&O user more complicated.Is there hope for improvements or it it just something that we/some of us have to work around, is the big question here!
MM
Location: Flensborg————DanmarkNevertheless that this is better discussed in a private message thread, it would be nice if you could return here with the outcome of that.
I guess those who have started following the thread, will be interested in the results.MM
Location: Flensborg————DanmarkDoes it show up in the B&O app or in the Beotool app (assumed it is online)?
The leaking battery issue is probably more common than one might think.
I know that in Denmark any serious dealer will replace the battery before selling a V1.
All you can hope for is, that it has not already caused too much damage.
I’d let a dealer or a skilled technician have a look, if it was mine.MM
Location: Flensborg————Danmark@Millemissen this workaround doesn’t work for me with my Theatre but should work if it was a Beosound Stage.
Honestly I never tried!
My MyButtons are all ‘occupied’ with radio and tv stations and now, that my wife has gotten used to that, I would not want to change it.My BM6500/CD6500 is in the same room as my Theatre and have no speakers connected.
My solution is to put in a cd and press play on the CD6500 and then push Join on the BROne for the Theatre.
Works well, since I mostly listen to a full cd there. (If really needed I can start/stop/skip in the app – choosing the Converter there).But it is a funny feeling, when I know that – if I go to the living room (with an Essence and a set of speakers) and want to listen to a cd – I can easily start/stop etc using the BROne there.
However, I doubt that they will change the behaviour of the BST/and app….so I will just have to live with that as is.
I totally agree with you – the Theatre is a great product with great sound options etc!
MM
Location: Flensborg————Danmark -
AuthorPosts