griebel

Forum Replies Created

Viewing 20 posts - 1 through 20 (of 20 total)
  • Author
    Posts
  • in reply to: Besound 5 ist not working #60263
    griebel
    GOLD Member

    I seriously doubt that the lack of display of the BS5 unit is due to the need of a software update.

    in reply to: Set IP for BeoMaster5? #57410
    griebel
    GOLD Member

    A fixed IP is defined in the internet router not in the BeoMaster5.

    in reply to: Beosound Theatre — Knowledge Base #56462
    griebel
    GOLD Member
    1. Hi,

    Is there a guide to pair a Bluetooth headphone to the BeoVision Theatre? Doesn’t seem to be straightforward.
    Thanks

    Guy

    in reply to: BeoMaster 5 motherboard #43800
    griebel
    GOLD Member

    The problem seems to be more serious I thought. Since today, the BM5 crashes about every 5 min. Both the motherboard and the hard drive were replaced. I’m a bit clueless now…

    in reply to: BeoMaster 5 motherboard #43797
    griebel
    GOLD Member

    I never experienced this problem with the original HDD. Can’t tell when it happens exactly; seems random, but it’s about once a week or so. Need to check the led on the BM5 when it crashes.

    There is a USB hub connected to the BM5. OK I will remove it and see.

    I did a clean installation and just copied the music. Will see if the alignment can fix the problem.

    The motherboard is not the cause; it was replaced recently for the third time since I have an SSD drive. The crashes occurred with the 3 motherboards.

    in reply to: BeoMaster 5 motherboard #43794
    griebel
    GOLD Member

    I tried the WD SSD drive, but like with the MX500 drive, the BM5 crashes about once a week and I have to do a mains reset to make it work again.

    Has anyone experienced this issue when having replaced the original HDD by an SSD? If yes how can it be solved? Thanks

    in reply to: Connect with Mac to BeoMaster 5 #53754
    griebel
    GOLD Member

    Thanks!I actually solved the issue by re-entering the password in BS5. Must have gotten lost since I last connected quite some time ago.

    in reply to: beo5/6 adaptor part #53580
    griebel
    GOLD Member

    Hello Matador, I did use this battery https://www.123accu.nl/Bang-Olufsen-8700091-HHR-120AAB33-F1x2-accu-2-4-V-1200-mAh-123accu-huismerk-i47359.html for some weeks now and it seems to work fine. Regards, Johan

    Unfortunately, they don’t do international shipping

    in reply to: BeoVision Theatre and Atlona matrix #53571
    griebel
    GOLD Member

    The rationale that I’ve seen – this was posted (albeit caveat’ed by his not being involved) was that the vast majority of users nowadays just use internal sources plus perhaps one peripheral (a set top box, or Apple TV).

    That makes sense.

    Your way out may be (ask your dealer) to get a BeoLiving Intellingece (the Gateway replacement)

    I use a BLI and Creston to control my B&O devices. They sure will be able to do the (Atlona) job when properly programmed.

    in reply to: BeoVision Theatre and Atlona matrix #53569
    griebel
    GOLD Member

    Thanks for confirming.

    There are as you have tested work around solutions, but probably all not user friendly.

    Not sure I understand the rationale behind B&Os choice to no longer support Atlona… and Atlona for not having developed an App able to control their Matrixes.

    in reply to: Beo4 “special remote “ #53398
    griebel
    GOLD Member

    Alternatively, the IR codes of this region free command can be incorporated in the Beo5/6 remotes.

    in reply to: BeoMaster 5 motherboard #43793
    griebel
    GOLD Member

    Thanks so much, Rendboell. Will get the WD and give it a try.

    Guy

    in reply to: BeoMaster 5 motherboard #43790
    griebel
    GOLD Member

    Hi,

    Is there a comprehensive and step by step guide on how to replace the original HDD by A 1TB SSD disk.

    I read all the threads about the topic, but I’m missing something here since the only thing I get with the new drive on reboot is « DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER »

    I did the following:

    1) Removed original HDD and connected a Crucial 1TB MX500 2.5 SSD disk

    2) Launched Maintenance Tool on a USB stick and executed the « Clone Entire HDD »

    3) Removed the USB stick with Maintenance Tool, but all I got upon reboot is the above insert disk error message

    What do I missing? Thanks for your help

    Guy

     

     

    in reply to: Beoplay H95, a review #48953
    griebel
    GOLD Member

    I certainly agree with the discomfort observation. I use the headphone when on long flights. After a few hours, it feels uncomfortable and also experienced the mild headache.

    griebel
    GOLD Member

    Hi,

    Can anyone recommend an HDMI to DVI-I+audio converter to connect an ATV to a 7-32 which has been upgraded to HD ready? Thanks

    in reply to: BM5 reboot feature and time #41384
    griebel
    GOLD Member

    I replaced the native HDD by a Crucial SSD 1 To MX-500. Everything works perfectly and needless to say that performance (e.g. reboot speed, access to media files, connection to N.Radio stations) have dramatically improved.

    in reply to: Beo 5 battery #38788
    griebel
    GOLD Member
    in reply to: BeoSound 5 screen dead? #35172
    griebel
    GOLD Member

    Thank you. I will definitely look at this offer.

    in reply to: BeoSound 5 screen dead? #35170
    griebel
    GOLD Member

    The BM5 works fine with a new HDD. It’s the BeoSound5 that has a dark screen. Replaced the DVI cable with a new one; didn’t help.

    in reply to: BeoCom Technical Advice Required #34366
    griebel
    GOLD Member

    I once had that problem. I solved it by restarting the modem while BeoLine connected to it.

Viewing 20 posts - 1 through 20 (of 20 total)