Report Problems with the Site Here

Home Forums General Discussion & Questions BeoWorld Feature / Problem Report Problems with the Site Here

Tagged: 

Viewing 20 posts - 1 through 20 (of 26 total)
  • Author
    Posts
  • #32983
    Keith Saunders
    FOUNDER Member
      • Hampshire, England

      If you have any problems on the site, then please report them here.

      Also any “Constructive” feedback on other facilities or modifications to an existing feature, then please let me know.

      #32984
      trackbeo
      Blocked

        Feature request: Add custom logic to attachment creation when the usual picture suffixes are used for attachment files, so that it asks (approx.), “Can I insert this into your message as a picture?”.  Thus posters can say “yes” allow the pictures to be visible to anyone, or “no” to keep the pix invisible to folks not logged in.  Forum websites that don’t allow visitors to see pictures are anathema — make this one at least *offer* to prevent this, because most folks won’t understand the difference.  See the most recent thread where the poster almost certainly intended for people to view the TV on offer but mistakenly (I believe) attached the pictures as files rather than inserting them: https://forum.beoworld.org/forums/topic/i-want-to-give-away-a-beovision-5-fully-operational/

        #32985
        Keith Saunders
        FOUNDER Member
          • Hampshire, England

          Good day Keith,

          Not so much a problem but feature request/knowhow.

          Q. How can I get the last post to a topic to be top of the page as default?

          Cant seem to see an obvious answer.

          Thank you

          Well, you will be surprised to learn that is exactly how I had the forum setup when the new forum started. The latest post appeared directly under the question. However I had so many complaints that people apparently could not find the last post that I changed to it to what we have today.

          It was for that reason I implemented the up an down arrows to get to the top and bottom of the current page.

          I feel I am in a no win situation with this one!!

          Keith..

          #32986
          YannChris
          FOUNDER Member
            • Brittany, France

            Well, you will be surprised to learn that is exactly how I had the forum setup when the new forum started. The latest post appeared directly under the question. However I had so many complaints that people apparently could not find the last post that I changed to it to what we have today. It was for that reason I implemented the up an down arrows to get to the top and bottom of the current page. I feel I am in a no win situation with this one!!

            ———————————————————————————————————

            I access to the last post of a thread by clicking on the time mentioned on the top-right of the thread’s name.

            Fast and easy!

            #32987
            trackbeo
            Blocked

              Suggestion: If the manuals section had a list that was browse-able by any registered user, one could see whether a particular manual was available — if one paid for a Gold upgrade!  (Not visible to un-logged-in users (or spiders), but directory listable to all Bronze&Silver.)  It would be free advertising of the benefit Gold Membership brings!  (N.B. I just resorted to scanning a (tiny:-) manual, because I couldn’t tell a newbie to upgrade and download it, with any certainty that it was even available.)

              #32988
              trackbeo
              Blocked

                Minor feature suggestion: The “Report” drop-down list needs another item: “A.I.  B.S.”  E.g. user “maiti” which is merely sowing the ground of reputation with inoffensive but useless LLM crap, preparatory to creating whatever harmful post in the future.

                #32990
                XavierItzmann
                BRONZE Member

                  According to Guy on this thread,

                  Beotime disassembly

                  the post below had photos until a day or so ago (photos of BeoTime disassembly), and according to Guy the photos are today gone.  Do observe that the rest of the thread below does have some photos.

                  https://archivedforum2.beoworld.org/forums/p/189/270504.aspx#270504

                  Anyway, thanks for asking Administrator!

                  #32989
                  Multicare
                  GOLD Member
                    • Leeds, West Yorkshire, UK

                    Hi all,

                    Please let me know if there are any issues since the site transfer

                    Multicare Electronics - Bang & Olufsen classic service centre.
                    Repairs and refurbishment to both old and new.
                    multicare.org.uk

                    #32996
                    Multicare
                    GOLD Member
                      • Leeds, West Yorkshire, UK

                      Hi,

                      I hope this has been resolved for you now.

                      According to Guy on this thread,

                      Beotime disassembly

                      the post below had photos until a day or so ago (photos of BeoTime disassembly), and according to Guy the photos are today gone. Do observe that the rest of the thread below does have some photos. https://archivedforum2.beoworld.org/forums/p/189/270504.aspx#270504 Anyway, thanks for asking Administrator!

                      Multicare Electronics - Bang & Olufsen classic service centre.
                      Repairs and refurbishment to both old and new.
                      multicare.org.uk

                      #32991
                      Madskp
                      GOLD Member
                        • Denmark

                        Hi all, Please let me know if there are any issues since the site transfer

                        Hello Mark.
                        It lools like the member status has not been transfered correctly on the forums. In the posts I have been looking at I only see bronze members where I know more than one of them were Gold members including myself.
                        On the main web site my member status seems to be correct.

                        #32992
                        Multicare
                        GOLD Member
                          • Leeds, West Yorkshire, UK

                          Thank you for letting me know, I have added to the action tracker.
                          We will resolve this as soon as possible.

                          Multicare Electronics - Bang & Olufsen classic service centre.
                          Repairs and refurbishment to both old and new.
                          multicare.org.uk

                          #32993
                          Multicare
                          GOLD Member
                            • Leeds, West Yorkshire, UK

                            Thank you for letting me know, I have added to the action tracker.
                            We will resolve this as soon as possible.

                            Multicare Electronics - Bang & Olufsen classic service centre.
                            Repairs and refurbishment to both old and new.
                            multicare.org.uk

                            #32994
                            YannChris
                            FOUNDER Member
                              • Brittany, France

                              Hi Marc,

                              Happy to meet you.

                              In the transition, I lost my avatar and the “Founder” mention which was previously added to my gold member status.

                              Kind regards,

                              Yann.

                              #32995
                              Multicare
                              GOLD Member
                                • Leeds, West Yorkshire, UK

                                Hi,

                                I hope this has been resolved for you now.

                                Hi Marc, Happy to meet you. In the transition, I lost my avatar and the “Founder” mention which was previously added to my gold member status. Kind regards, Yann.

                                Multicare Electronics - Bang & Olufsen classic service centre.
                                Repairs and refurbishment to both old and new.
                                multicare.org.uk

                                #32998
                                Multicare
                                GOLD Member
                                  • Leeds, West Yorkshire, UK

                                  Archive Forum 2012-2022 is not working: BeoWorld2

                                  Hi,

                                  There are a couple of issue that we are working on in the background.

                                  Generally the interim resolution for this is to make sure you log out of beoworld.org and then visit archiveforum.beoworld.org.uk

                                  I hope this works for you

                                  Multicare Electronics - Bang & Olufsen classic service centre.
                                  Repairs and refurbishment to both old and new.
                                  multicare.org.uk

                                  #32997
                                  lesbart
                                  SILVER Member
                                    • Norway

                                    Archive Forum 2012-2022 is not working:

                                    BeoWorld2

                                    #32999
                                    Ravsted
                                    BRONZE Member

                                      Hi,

                                      Forum is very slow today.

                                      Home

                                      It takes at least 10 secs just to open a post…

                                      Edit: and it took approx. 30 secs to submit this reply…

                                      #33000
                                      Millemissen
                                      BRONZE Member
                                        • Flensborg————Danmark

                                        Same here  🙁

                                        MM

                                        #33001
                                        YannChris
                                        FOUNDER Member
                                          • Brittany, France

                                          Hi,

                                          Still very slow for me by now.

                                          Same lag as mentioned by Ravsted.

                                          Yann.

                                          #33002
                                          Multicare
                                          GOLD Member
                                            • Leeds, West Yorkshire, UK

                                            Looks like we need to increase the resources allocated to the server.

                                            Hopefully this can be completed in the next few days.

                                            Multicare Electronics - Bang & Olufsen classic service centre.
                                            Repairs and refurbishment to both old and new.
                                            multicare.org.uk

                                          Viewing 20 posts - 1 through 20 (of 26 total)
                                          • You must be logged in to reply to this topic.