[sonavor]

Great.
I will be interested in how it turns out.
Obviously, re-check that the problem is still occurring right before trying anything.
It has been a difficult problem to nail down.

John

[sonavor]

Hi ALF,

Can you disable the Beomaster 8000 IR receiver circuit to verify the problem doesn’t occur when the remote control receiving circuit is out of the picture?

It will require leaving it disabled for a good period of time (maybe a month).  Then verifying the problem returns after re-enabling the IR receiver.

John

 

[sonavor]

Here are a nice series of posts by Alain (boneofiel) showing a complete Beomaster 6000 Type 2702 restoration.  The link starts with the final post and goes backwards.  At the end of each page is a link to look at older posts to continue the thread.

There is a lot of good information in the threads.

[sonavor]

Yes, this is pretty disappointing.
Is the “Archive Forum 2012-2022” a work in progress or is it done?
As it is today, the photos that go with the Workbench threads on how restoration/repairs were done are missing.  I had quite a lot of image content on some of those threads and they are necessary to understand what the thread text is talking about.

I also had a lot of useful information in PMs with other forum members.
Is that going to eventually be restored or is that gone as well?

-sonavor

[Author]

Posts