BeoWorld Logo
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Liviu Ojoga

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 7 September 2026 at 14:48 in reply to: Beo4 for BV11 #125447
    Liviu Ojoga
    BRONZE Member

    Software is updated…..latest version 2017:(

    but it cannot find a newer one

    7 September 2026 at 10:36 in reply to: Beo4 for BV11 #125444
    Liviu Ojoga
    BRONZE Member

    Yes, I can control BV11 on BO app, but wife is not happy with phone controls:)

    I assume new beoremote1 displays with 4 buttons can be matched with old aluminum frames….I am still thk if I should buy a new beoremote 1 or just the display/buttons panel

    7 September 2026 at 09:54 in reply to: Beo4 for BV11 #125442
    Liviu Ojoga
    BRONZE Member

    It control it (start/stop/vol/etc), but if I open menu or program list I cannot scroll

    7 September 2026 at 09:52 in reply to: Beo4 for BV11 #125441
    Liviu Ojoga
    BRONZE Member

    After changing BV11 from beoremote1 to beo 4 you have another tab active, with 3 options : 1,2 and 4.

    i thought that they ar eequivalent of Modes of beoremote so I tried all of them in order to match the beo4 mode (that I cannot find in setup to change)

    When I selected 4, both remotes became unresponsive….I couldn’t change anything in bv11

    i will paste what chatgpt instructed me to do, and it worked:

    ● + LIST → OPT? → GO → V.OPT → 1

    7 September 2026 at 05:46 in reply to: Beo4 for BV11 #125429
    Liviu Ojoga
    BRONZE Member

    I tried to setup BV11 to be controled by beo4….then tried 1 and 2 and 4 ….Beware that when you choose 4 both remotes (beo4 and beoremote1) became “dead”.

    It was a full story to recover access to bv11:)

    6 September 2026 at 20:24 in reply to: Beo4 for BV11 #125427
    Liviu Ojoga
    BRONZE Member

    So, the only remote to control bv11 is the joystick one?

    In this case, did someone replace the beoremote one screen or do you advice to buy a new now?

    I have seen here an offer for 177GBP just for the screen.

    6 September 2026 at 12:35 in reply to: Beo4 for BV11 #125409
    Liviu Ojoga
    BRONZE Member
    Guy wrote:

    For the navi remote (with joystick)

    > Press and hold the standby button down.
    > Press LIST to get access to the Beo4 setup function.
    > Let go of both buttons. ADD? appears in the display.
    > Press LIST or ^ to display ZONE?, CONFIG? or MODE? on Beo4.
    > Press the centre button to select the setup you want.
    > Press up or down arrow to display the setting you want on Beo4.
    > Press the centre button to store the configuration.
    > STORED appears, indicating that the configuration has been stored.
    Long press on BACK will leave the setup.

    I did this but Zone and Mode doesn’t appear!

    6 September 2026 at 11:36 in reply to: Beo4 for BV11 #125404
    Liviu Ojoga
    BRONZE Member

    Thanks!

    I setup BV11 to be used with beo4, but the problem is that I cannot find MODE on my beoremote4.

    did you put the remotes in mode1 and tv set to be used w b4?

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)