Forum Replies Created
-
AuthorPosts
-
Ok, it seems nobody knows TTl or Rs232 protocol.
Well, can so someone suggest another way to control Beosystem 3 via domotic system? For example, can soleone explain what is the “Ir-in 9 pin” and the “IR 1+2” on the rear panel?
I am thinking i can use the Lintronic 238 but first of all i want to know every connection and how can these be used.
Thank you very much for any reply.
No other section…..
Attachments:
You must be logged in to view attached files.Here is it.
Attachments:
You must be logged in to view attached files.Here is the screenshot.
Attachments:
You must be logged in to view attached files.Hello.
It seems i am not able to post a new thread….. i have written, gave it a title and press the “submit” button, but my discussion is not on the list and it seems to be missed. I have tried a second time and the result is the same….. Maybe i am doing something wrong, but i don’t understand what….
Any help is appreciated.
Scuse me for my bad english and thank you very much.
Try to set “Monitor out” to “B&o monitor” ant choosing “65 D7”, resolution higher.
Dear friend, have you got like me a “Beosystem3” with “Dvi”out and so non with “Hdmi out”?…… In this case, finally, after about 3 years trying every possible way I think i have the “goal”!
….no….. this was not the right way. But i think this time i am trying a new way offering good results. I am trying a device and maybe it can be the right one (i hope). My Beosystem 3 has a “Dvi” out to screen and i have placed a “powered” “Dvi to Hdmi converter”……. I am crossing fingers.
I think maybe i have solved….. I repeat “maybe” because i need to test the result a little more time.
I only have tested this for about half an houre but this seems to be success because in about 30 minutes, no problem while before, i had the monitor problem every 2 o 3 minutes.
First of all, scuse me for my bad english, but i want to share my experience hoping to be useful for someone trying to do the same thing.
No “edid emulator”, no “Hdmi splitter” needed, but a very strange thing called “Hdmi to Hdmi” powered by 12v and setting configuring in “Monitor”.
I have had this result after about 1 year trying everything in my mind.
I have added this strange thing “Hdmi to Hdmi” in exit from Beosystem to Hdmi input into Tv. The Tv is a “Philips” Tv 43′ (and i think the problem was about the Tv). After this, i have try every possible monitor out configuration in the “Option-> Connection->Monitor” on Beosystem3….. Starting from the first option in the menù and the first option in “resolution” and trying every configuration.
Well, i have found “B&o Monitor” “65 v7” resolution “1980” as the affordable configuration. No other configuration was affordable and i do not understand why. But the only thing i can say is that maybe i have solve my problem.
Next week i will give a try with more time. I hope my “new Beovision5” will be newly alive, beautiful as it was 22 years ago and ready to work again!!
Dear Ravsted, i have done the way you suggested me using an Hdmi splitter, but it seems not to be the right way for me.
However, i think you are in right telling not to change my whike setup. I did a great job and so i have to solve this last problem.
And using “Beosystem3” only for the audio, it means loosing control of the Beosystem menu options. No, thinking well about this, i am sure this is not the right thing…….
Beosystem must to be the main controller and i need to solve the problem in some way.
And how do you connect a Dvd reader? If you connect Dvd reader to Hdmi into Tv, are you sure the audio output from Tv to Beosystem3 is 5.1?
I suspect no but maybe i am in wrong….. I suspect Tv has not capabilities to offer 5.1 out.
Do you think if i connect a Playstation to the Hdmi in into the Tv and then from the Tv a “Toslink” cable goes into Beosystem3 i can hear a 5.1 audio? If “yes”, can you suggest me something about making it working?
In the “Beosystem3”, i can see the phone-jack out. Then, i can see “Video in” “L-in” “R-in” “Spdif” and “Ctrl”. Then again another set of “Svideo” and “Video in” “L-in” “R-in” “Spdif” and “Ctrl”.
What are these able to do? I think they are inputs, i am in wrong? How do they works?
Many and many try i have done but no success, and i am veru tired about…..
I am thinking about a “reverse” solution. What do you think about using “Beosystem3” only for the audio?…..
How do you think i could connect the system in this way? I can press the “Sat” button (or any other) in B&o4, so Tv turns on and Beosystem turns on. And then?……
Beosystem3 with surround system, gives great great sound even if the sources is only stereo…… i want to be sure it is not lost!. And how can i connect Dvd reader (Playstation) as to have this able to offer 5.1 audio?…..
I am very confused, but maybe this can be a way to walk…… I want to do a nice work but it is not easy and so, any help is appreciated.
Scuse me for my bad english.
Really?????
Well, i am using as “Display out” just a “Philips Tv”!!….. so i think maybe the problem is into this Tv!
All my sources (Decoder and Playstation) go into “Beovision 3” and then go out into “Philips Tv” via “Display out 1”. The strange thing is that source “Decoder” seems not to have this problem while the source “Playstation” have this problem.
I think i have foud the menu you are talking about in “Connection” then “Display 1 output”.
It seems a very risky menu….. i suspect a wrong configuration make all the system unusable and i am afraid about this.
Hello and thanks for your reply. I am doing many and many and many trying from months, buto the problem is not solved. It seems i am not able to find the menu tou suggested. In “Options” i press “red arrow” and go, or “0 0 go”, but i really can not find the “screen configuration”. However, after many and many try, i can tell “EDID emulator” is not the solution. And i can tell the problem source seems to be “Playstation 4” connected to “Dvd source”. U did a “giant work” and i am very frustrating because this seems to be a very stupid setting problem able to destroy all mi job……
Many thanks for your reply! I will study about what “EDID Emulator” is and i will give a try about.
Even the rear side of my old Beovision5 i have fine cutted and modifyed with my hands in order to have a nice black door bordered in alluminium. Over that door, i can easily access at the Beosystem3 connections and at the new Hard disk in wich i have stored all my photoes and my favoutite films.
It was a real hard job, and i am proud about this.
All seems to be ok. A new decoder, a new controller for bluetooth Ps4 command, a new interface for ethernet control integrated in my domotic system and a new life for my old Beovision5.
All controlled from the original Beo4 remote via the original receiver on the upper side of Beovision5.
But only last problem destroy all my job. It’s impossible to watch tv when every minutes or two screen signal is lost………. And i really don’t know how to solve this.
-
AuthorPosts
