Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Beofile7

Forum Replies Created

Viewing 4 posts - 81 through 84 (of 84 total)
  • Author
    Posts
  • in reply to: HD Sat Module Beovision 7 40 vs 32 #51737
    Beofile7
    BRONZE Member

    I cannot answer your question directly but here is my experience…

    I also have a Mk3 analogue only BV7/40. The “picture board” failed. It was replaced under warranty and then suddenly I had digital channels! I have often questioned whether there is a Sat receiver in there somewhere too? Short of connecting a dish and trying it I don’t know but via operation there is nothing to suggest that it is not there? It all behaves as if it is there. Unfortunately the digital freqs were changed a year or so ago so i have now lost the digital channels and of course there is no analogue so it is only useful for Chromecasting now?

    in reply to: Beovision 10 rescue from death #49781
    Beofile7
    BRONZE Member

    I have one as a bedroom TV and would be totally p11sed if it went u/s. To me this is a somewhat modern TV? My Beovision LX6000( bought new in 1995) is still going 100% with no mx ever! The world is simply going backwards!

    in reply to: BeoGram 9500 Tone Arm Dropping #49645
    Beofile7
    BRONZE Member

    Common fault. ALL Beograms of that era have or will suffer. One end of the rigging which controls the tonearm movement sits under tension on a plastic post and eventually breaks the post. Glueing back will not last. The solution is to replace the post with a self tapping screw. Getting the rigging back together correctly will fray your nerves! Check out videos on YT showing clearly what is involved. It can be done, I did mine but it is a frustrating job. Good luck.

    in reply to: Safe payments for B&O purchases #43311
    Beofile7
    BRONZE Member

    Just a little story to ponder…

    A couple of years ago I sold a vintage TEAC reel to reel on eeebay in UK for 1000+ pounds paid for with paypal. The buyer after a few days demanded a return for refund which was agreed to. What came back was a stripped of parts machine badly smashed up in a poorly packed wet cardboard box that offered no protection at all. All atempts to communicate with the buyer went ignored so a case was opened against him with paypal. Despite evidence and photos to prove the case paypal refused any action or protection. I have since had a similar issue with them. So paypal is no sure guarantee unfortunately.

Viewing 4 posts - 81 through 84 (of 84 total)