[69er]

so, small update as the hdmi extractor arrive. I have sound 🙂
but, the beolab are connected through chinch and the extractor has a only a physical volume control – i wisely ordered one with, assuming the hdmi has a full signal. It would have been soooo loud.

Now i am going to add a passive amplifier (found an old denon avr reciver in my cellar). HDMI etractor via optical into the denon, from there to the Beolabs and the internal speakers of the beovision. With temote control, which will be exchanged by a nice all in one, where i can control the beovision, the fire tv stick and the receiver.

 

Not as nice as the original – but it works and i really can´t throw away a beovision 10-40 in (picture) working condition…

Now i am awaiting some spare pcbs from a friend in slovenia, maybe i can exchange my internals with them and we are back on the original train. In the meantime – i learned a lot about the beovision.
All the best
69er

[69er]

That´s quite a bit more information.

Unfortunately the headphone jack is also dead.

My current plan is: connect a fire tv stick into a HDMI Audio extractor. Video through HDMI to the BV10. Use the speaker output of the extractor  to connect them to the powerlink sockets (left & right). in parallel input the speaker wires into a digital amplifier which will be connected through a frequency crossover to the speakers in the BV10.

[69er]

this didn´t really help 😉

[69er]

Nice story and setup

69er

[69er]

Absolutely mindblowing. Really excellent work, Christian!

[69er]

Anybody who could help?
best regards

69er

[69er]

Here is a video of the problem

[69er]

No idea?

[69er]

I am in Germany. @nbohemen: Could You please share the contact in Utrecht with me?
Best regards

69er

[69er]

Nobody, who knows how to fix that thing?

[69er]

Any expert for Beolab 1 available?
best regards

69er

[69er]

Thanx. By hiding the connector section it worked. Was some interference

[69er]

Ok, solved also the buzz problem. Connected different cables to the Beolabs and now it sounds fine.

 

Thanx

69er

[69er]

I think i have an idea. After searching half of the internet and finding one post with some inteference to a plasma screen in the same room – i turned of the light above the player and now it works much better. WEIRD

So it has something to do with the LED lights in my wall lamp.

 

But – i can still hear the commands of the beo4 with a small buzz in the loudspeaker.

 

Any idea?

 

Best  regards

69er

[69er]

happy to help

[69er]

Hi Martin,

ich kann etwas löten – messen auch. Aber hauptsächlich wollte ich Deinem highend modding etwas folgen. Habe mehrere Pentas und kann daher auch mal ein Pärchen aufmotzen. Dasselbe würde ich gerne auch mit einem Paar 8000er machen.

Ich dachte dabei hauptsächlich an die Kondensatoren, erinnere mich aber auch an OPs die Du angesprochen hattest.

Viele Grüße

69er

[69er]

Hallo Martin,

gibt es eine Liste mit den empfohlenen Bauteilen, die man an einer Mk3 wechseln sollte?

Viele Grüße

69er

[69er]

Hallo Die_Bogener,

ich würde mich gerne in den Weihnachtsferien mal an ein Paar Pentas 6631 dranmachen und sie entsprechend Deiner Empfehlung modden.

Leider finde ich den in vielen Beiträgen erwähnten Workshop nicht. Hast Du evtl. einen noch gültigen link für mich (und evtl. auch eine Teileliste)?

 

Viele Grüße und vielen Dank für die vielen klasse Hilfestellungen im Forum

69er

[69er]

it will look good – at least

[69er]

Anything i could test or do additionaly?

[Author]

Posts