Home Forums Product Discussion & Questions BeoSound Theatre New product launch – beosound theatre?

Viewing 20 posts - 221 through 240 (of 1,335 total)
  • Author
    Posts
  • #37462
    Millemissen
    BRONZE Member
      • Flensborg————Danmark

      Can say if that will be in english….probably not, but in danish as per usual.

      Henrik/BOTF has a video coming on thursday:

      MM

      #37463
      LeMirage
      BRONZE Member

        What are the Theatre placement options on a shelf in a (large) TV cabinet? Is there some kind of small base included or can you put the Theatre itself directly on a shelf ? Without getting too much of sound interference kind of blocking the downward direction of the drivers?

         

        #37464
        NQVHNWI
        FOUNDER Member

          The Options as I currently understand them:-

          1. Included with BSTheatre is a custom theatre stand (mount on cabinet, TV on wall etc)
          2. Motorised TV Floor Stand (must also buy a TV “spine” to connect BST to the Panel)
          3. Motorised TV Wall mount (also requires the TV “spine” connector)
          4. Static heavy duty table stand that if connecting a panel must also have this  TV “spine”

          I have opted for 4 in my purchase. The links to all the assemblies are further up in the thread. (post 9167)

          #37465
          Millemissen
          BRONZE Member
            • Flensborg————Danmark

            What are the Theatre placement options on a shelf in a (large) TV cabinet? Is there some kind of small base included or can you put the Theatre itself directly on a shelf ? Without getting too much of sound interference kind of blocking the downward direction of the drivers?

            ————

            https://support.bang-olufsen.com/hc/en-us/articles/9396520485777-Beosound-Theatre-Installation-videos

            MM

            #37466
            fansastic
            BRONZE Member

              Great info Steve, thank you very much!

              1. Does the G1 panel from LG also works with the Theatre?
              #37467
              LeMirage
              BRONZE Member

                Thanks guys, all clear now. The base for most simple configuration is included.
                I would be considering the Theatre as a standalone music system , and when my BV11 fails with a different TV  it could be my home cinema sound system with (in the future possible?) my two Levels as rears.

                 

                 

                #37468
                allanminds
                BRONZE Member

                  Hi

                  I just ordered a theatre, but I have a Philips oled (854), and would like to use that with the theatre.

                  Can anyone confirm that you can use the BeoRemote one BT with Puc codes or Cec, to control devices connected to hdmi ports on the theatre? Unfortunately my dealer could not answer the question.

                  My best

                  Allan

                  #37469
                  Millemissen
                  BRONZE Member
                    • Flensborg————Danmark

                    That is a good question – especially if you think of a home cinema setup with a projector and e.g. an ATV4 box (and a bluray player) as the source/s.

                    My guess is that it will work – however I’d like that to be confirmed too.

                    MM

                    #37470
                    Sandyb
                    BRONZE Member

                      Not sure if you’ve looked at the Beosound Theatre – Technical information thread, but Steve has posted a link to the B&O spreadsheet that has been circulating around. It shows some functionality testing that B&O have done with various brand TVs, including a Phillips OLED.

                      Not sure if the testing scenarios are as comprehensive as you may ideally require, but its worth a look and may give you an idea of what is possible with the BR1 + Theatre + Phillips.

                       

                      #37471
                      Sandyb
                      BRONZE Member

                        thats my guess too, as in it should work.

                        The app seems to do all the settings for the Theatre, and I’ve seen the section within the app for Theatre settings where PUC device control is setup and assigned.

                        So it should be ok, but until someone does it at home, its going to be hard to say for sure.

                        #37472
                        allanminds
                        BRONZE Member

                          Thanks for answering, I also hope it will work, no sense in replacing a perfectly good TV.

                          So now we are only waiting for someone to test 🙂

                          /Allan

                          #37473
                          DHA
                          BRONZE Member

                            How far back will support be for older speakers (we have some Beovox RL passive speakers sitting doing very little) is there any way to get these connected up as rears for the Theatre?

                            #37474

                            Hi,
                            Yes, you can add ANY speakers, but passive Beovox speakers will require a power amp such as BeoAmp2 in order to connect to the Theatre. I don’t recommend using Passive or MCL2P as there are issues with correctly triggering these amps from newer B&O products with RJ45 outputs. The Theatre will be able to carry out room compensation with any passive speakers connected via any type of power amp, but it won’t have the acoustic profile of the speakers stored for magnitude and phase correction (unless you are using Beovox 1 or 2 speakers).

                            Kind regards, Steve.

                            #37475
                            DHA
                            BRONZE Member

                              Thanks Steve

                              #37476
                              NQVHNWI
                              FOUNDER Member

                                I was wondering when B&O Manchester were going to release a review?

                                Strangely quiet it seems?

                                #37477

                                Hi,

                                Don’t worry, John has been very busy from what I gather speaking to him recently.  I know his Theatres were delayed in transit but they have now arrived, I am sure he won’t mind me sharing this picture that he sent to me recently:-

                                Manchester Theatre 2

                                Producing YouTube videos is very, very time consuming, but I am sure that John will have a superlative Beosound Theatre video coming when he gets the chance!

                                Kind regards, Steve.

                                #37478
                                Mark
                                FOUNDER Member

                                  I guess we got in the habit of seeing John’s video a little earlier.  He previously said on the Emerge video:

                                  Normally when a new product releases I like to have my video filmed, edited, done, ready to go on youtube at 8 o’clock on launch day.

                                  I think we just miss him.

                                   

                                  #37479
                                  SimonWeir
                                  BRONZE Member

                                    My install is happening today.  It will be the first motorised wall bracket for the Manchester store.  I am moving from an Eclipse Gen 2 55” to a Theatre with a LG G2 65”.  Interestingly the actual physical size difference is minimal due to the protruding beyond the screen soundcenter on the Eclipse.  Hoping the increase in screen size will be epic for movies but not too overwhelming for general TV.

                                    I will add pictures once it is up and running.

                                    As I have it I will be connecting my BeoLab 19 subwoofer (moving to wired from WiSA as I experience nightly momentary drop outs where the sub stops, flashes red and then immediately green and is playing again 5 seconds later, I tried different locations in my room but it still happen most nights between 10 PM and 11 PM, so my neighbours or something in my house is causing this), along with my 3 x sets of BeoLab 17 speakers for surrounds & height on WiSA (rock solid connection, so assume the radio is better on these than the BL19).

                                    #37480
                                    BeoTool
                                    GOLD Member

                                      along with my 3 x sets of BeoLab 17 speakers for surrounds & height on WiSA

                                      Will you mount a pair of 17s on the ceiling?

                                      #37481
                                      beojeff
                                      BRONZE Member

                                        Can anyone confirm from looking in the app if there is the option for the Theatre to forward LIGHT/CONTROL commands to the BLI?

                                        I’ve been curious about this for the Stage as well.

                                      Viewing 20 posts - 221 through 240 (of 1,335 total)
                                      • You must be logged in to reply to this topic.