Vedet

Forum Replies Created

Viewing 20 posts - 21 through 40 (of 43 total)
  • Author
    Posts
  • in reply to: Wi-Fi networks and B&O #49264
    Vedet
    BRONZE Member

      Теперь вы можете зайти в приложение Bang & Olufsen и подключить продукт к новой сети. Часто это возможно с помощью уведомления, которое отображается над вашим списком продуктов.

      Good afternoon!

      Thank you for such valuable information.

      If possible, tell  more about the Notification – how it looks, where it should appear, in which section of the Application, and, most importantly, how to connect Beosaund Emerge to the new network using this Notification, if you are not overwhelmed, then explain step by step, please.

      And in the second case, if the Notification is not reflected, I have to press “+” on the main page of the Application to open the general list of equipment, find BE in it, click on it and what next? To register it again? Or will the App only allow  to register a wi-fi network?

      in reply to: Wi-Fi networks and B&O #49260
      Vedet
      BRONZE Member

        Good afternoon!

        I can’t find in the B&O App how to disconnect from the wi-fi network and connect to another wi-fi network Beosaund Emerge. During the initial setup, everything is clear, I chose the equipment, setup, connection. And in the working order, I can not find how to switch to another network. Or do I have to exit this setting completely and configure everything again?

        in reply to: Wi-Fi networks and B&O #49259
        Vedet
        BRONZE Member

          You have a whole entertaining story with the replacement of equipment. But despite the fact that Google is pursuing its goals, the replacement was clearly a step forward in stability and speed, which means it was worthwhile.

          Thank you for such a detailed presentation and attention shown to my question.

          in reply to: Wi-Fi networks and B&O #49256
          Vedet
          BRONZE Member

            Thank you for your attention to my question.

            Can you tell me how the speed level changed in your first case when routers and  Mash systems were used? Has it grown or remained at the same level, but has it become more stable?

            in reply to: Wi-Fi networks and B&O #49254
            Vedet
            BRONZE Member

              Здесь нет проблем с ячеистой сетью 802.11ac (2 Linksys Velop)

              Thank you, your information inspires additional confidence.

              in reply to: Wi-Fi networks and B&O #49252
              Vedet
              BRONZE Member

                По сути, подключите каждое устройство спутниковой сети к вашему оборудованию Hifi / TV и позвольте сетям обмениваться данными между собой (очень высокая скорость передачи), но при этом взаимодействовать с вашим телевизором / Hifi по кабелю. Не используйте встроенные приемники Wi-Fi в устройствах Hi-Fi / TV. В каждом сетевом блоке обычно будет от 2 до 3 портов локальной сети.

                Thank you for the very valuable information for me.

                I didn’t know that it was possible to connect a Mash satellite via cable to my media center, and already connect it via HDMI to TV, whereas the main router connected to fiber will be connected to its satellite via wireless mash communication. Now I will know that this way you can achieve a more stable connection and maintain the speed level.

                in reply to: Wi-Fi networks and B&O #49251
                Vedet
                BRONZE Member

                  Я был тем, кто упомянул об этом в подкасте

                  Good afternoon!

                  I am very glad that you answered my question. Your podcasts always provide comprehensive information and are very interesting. Now everything became clear. Thank you for your clarification and prompt assistance.

                  in reply to: Wi-Fi networks and B&O #49248
                  Vedet
                  BRONZE Member

                    Thank you for your attention and such a detailed answer. Your advice are very valuable to me. I realized that you basically have a cable connection. And yet you reported that mesh Wi-Fi is working stably. It follows from this that you do not confirm the information that Mesh networks do not work stably with B&O equipment, if I understand you correctly?

                    in reply to: BeoSound Stage and compatible TVs #48895
                    Vedet
                    BRONZE Member

                      Спасибо. Другими словами, любые настройки телевизора LG: контрастность, яркость, резкость, масштабирование и другие возможны с помощью пульта дистанционного управления BR1, но только если он подключен к аппаратуре B & O. Или с помощью BR1 можно настраивать только звук и источники, а настройки изображения телевизора LG возможны только с пульта дистанционного управления LG?

                      Вы можете перемещаться по всем меню телевизора LG с помощью Beoremote One. Некоторые опции, доступные в виде прямых кнопок на пульте дистанционного управления LG, будут доступны в меню списка на Beoremote One.

                      Thank you. Your answer was very valuable and helped a lot.

                      in reply to: BeoSound Stage and compatible TVs #48892
                      Vedet
                      BRONZE Member

                        Thank you. In other words, any LG TV settings: contrast, brightness, sharpness, zoom and others are possible with the help of the BR1 remote control, but only when it is connected to B&O equipment. Or using BR1, it is only possible to adjust the sound and sources, and the picture settings of the LG TV are possible only from the LG  remote control?

                        in reply to: BeoSound Stage and compatible TVs #48890
                        Vedet
                        BRONZE Member

                          Good afternoon! I would like to clarify whether BR1 is paired only with B&O equipment, in this case Stage, connected to an LG TV, or can be paired separately, without B&O equipment, only with an LG C3 or G3 TV, for example, to control TV settings by downloading the B&O App to the software providing an LG TV to pair the BR1 directly with the LG TV itself?

                          in reply to: Beosaund Emerge & BR one #48578
                          Vedet
                          BRONZE Member

                            Many thanks to you for such a detailed answer. Now I will know how to do the right thing.

                            in reply to: Beosaund Emerge & BR one #48576
                            Vedet
                            BRONZE Member

                              Thank you, did I understand correctly that when pairing via Bluetooth, as the only correct one, the connection between the remote control and BS Emrerge should remain stable during any movement around the house? And I can control BS Emrerge from anywhere in the house using the BR1 remote? And the second point, I am a beginner, and I would be extremely grateful and grateful to you if you would write the BR1 connection procedure using the B&O App in more detail step by step.

                              in reply to: Beosaund Emerge & BR one #48574
                              Vedet
                              BRONZE Member

                                Thank you for your attention to my question. As far as I understand, pairing can be established in two ways: via Bluetooth and using the B&O application. The version of my B&O App is 5.2.0.230808 -48327. The last update was from 08.08.2023, but I could not find Beoremote BT One in the application. It only has Beremote Halo. Therefore, I have paired with BS Emerge using Bluetooth. Can this be the reason for the pairing break, if “YES”, then how do I pair through the application if there is no BR 1 in it?

                                in reply to: Theatre and BR1 #48324
                                Vedet
                                BRONZE Member

                                  Was it possible to solve the problem?

                                  in reply to: BeoVision Contour and WiSA #47991
                                  Vedet
                                  BRONZE Member

                                    Hello! The BeoVision Contour TV is combined with the LG C3, model 2023 and supports the latest technology of wireless transmission of multi-channel audio WiSA. With its help, you can broadcast sound from the TV to compatible WiSA speakers (at the moment Klipsch, Bang & Olufsen, Axiim, Enclave Audio already have it). At the same time, we are talking not only about standard 5.1 sound, but also about modern formats, including Dolby Atmos. The Summit technology used in WiSA supports multi-channel audio without compression (up to 8 channels). According to WiSA, the sound transmission quality is 20 times higher than the capabilities of Bluetooh and Wi-Fi technologies.

                                    in reply to: Beosaund Emerge #45624
                                    Vedet
                                    BRONZE Member

                                      Thank you for such a detailed, clear and informative answer. This helped me a lot, since none of the instructions reflect this. I congratulate you and your loved ones on the Bright Resurrection of Christ – Easter.

                                      in reply to: Beosaund Emerge #45622
                                      Vedet
                                      BRONZE Member

                                        Very cool! Tell me in more detail how do you use BR one? How do you synchronize the selected list of radio stations in the application with the remote, do you switch radio stations from the remote? The selected radio stations, for example B&O radio in the application, are synchronized, reflected on the remote display and when you press the “music” button, you can see the list of radio stations from the application on the remote display and change them using the arrows of the BR one remote? Or is it happening in some other way?

                                        in reply to: BEOLAB 8000 speakers #44860
                                        Vedet
                                        BRONZE Member

                                          Tell me, in the case of replacing the grid with fabric on wooden grille (oak or walnut), will this drop-shaped LED be a technical obstacle to these actions, will it prevent them from getting up without interference, or perhaps they will close it and this will create certain difficulties.

                                          in reply to: BEOLAB 8000 speakers #44859
                                          Vedet
                                          BRONZE Member

                                            Thank you, this is a very valuable addition. I didn’t know about this detail.

                                          Viewing 20 posts - 21 through 40 (of 43 total)