Forum Replies Created
-
Just seen this and you may have bought it by now, but in case this is still of any use to you, I have a Beocenter 8000 (in fact, it’s for sale on eBay at the moment as I replaced it with a Beocenter 8500). Here’s what I found with mine:
- The tape deck needed new belts. There are two different models of tape deck on the Beocenter 8000 thru 9500 range but I think the 8000 was only ever fitted with the type 2. The belts are not very easy to fit (the large belt in particular is tricky to get in place). You can get the belts from Beoparts (now: Danish Sound Parts). If you try to play a cassette in it and it tries to switch to side 2, and then just stops, it’s likely in need of new belts.
- The type 2 tape deck also has another common fault, but is fortunately quite easy to fix – I managed to fix mine with this this very helpful advice from @Dillen – Beocenter 8000 tape deck clicking issue.
- The CD player worked fine on mine, but there is a common fault where faulty capacitors (and I am no electronics expert so forgive the explanation) cause the laser power to be reduced, meaning it can struggle to read discs. I did not have that trouble with my 8000 luckily, but I did have it with another 8500 I used to own, but sold for parts. Kits to fix this are available from Beoparts shop (now: Danish Sound Parts) cheaply, but you need to know your way around a soldering iron!
- The glass panels may have come loose, in fact I have owned a total of 4 of these Beocenters, and the glass panels had come loose on all of them. I removed the old glue very carefully basically by rolling it off with my thumb (very carefully, it took hours). I then used as strong double-sided tape to reattach it. Some of the black paint did come off the back of the glass around the edge while I was removing the glue despite the care I took, but that was easily fixed with black Airfix model paint.
- As for a matching turntable, alas I don’t believe that B&O ever did produce a turntable that matches the lovely gunmetal aluminium finish of the BC8000. The nearest match is the Beogram 8500 which has grey panels rather than gunmetal black panels. I used mine with a Beogram 3000 at first, then later a Beogram 8500. Neither matches the gunmetal finish but they still complemented it quite well. Note that as the BC8000 has a built-in phono stage you are looking for a Beogram that does not have a built-in phono stage. See here to find out which do and which don’t, with thanks to @Guy.
Good luck with it and let me know if you need any help with it. I really did love the look of my Beocenter 8000 more than the 8500 that I replaced it with (the black gunmetal finish is really nice), but I needed something that would work with active Beolab speakers, and I also wanted to add extra speakers using an MCL multiroom box. The 800o is not suitable for those, whereas the 8500 is (as are the 9000 and 9500, and I think the 9300 is too, but I never owned that one).
Thank you for the very detailed response! You are quite right, I already bought one. Or rather,.. I bought three. I got one of each:
Beocenter 8000
Beocenter 9300
Beocenter 9500
All three of them gave had the deck belts replaced and the 9300 has also had its CD parts replaced. All three look like they were new.
So far I have the 9500 in the living room with a pair of Beovox 3000 (the wall speakers). It’s a great combo (will have the cable situation sorted soon). In the home office I have the 9300 with a pair of Beovox CX100. Total overkill for such a small room. I love it.
So far I only have one issue. The 9500 has a constant low power-like hum when in standby mode. I’ve tried chsnging between 220v and 240v but I can’t hear any difference. Anyone else experienced this? The 9300 in contrast is completely silent in standby.
