[lechatsurletoit]

7/Removing the back plate, IR LEDs will  bend straight when gently pulling it out, no other choice, clearly was not made to be taken apart.

8/Cleaning with white vinegar and isopropyl alcohol (chatgpted this)

9/Fixing the tabs back with superglue, seems to work

10/Got some life back but still not working.

 

I will bring it to a shop, but I believe I did the most difficult part.

• This reply was modified 2 months, 2 weeks ago by lechatsurletoit.

Attachments:

You must be logged in to view attached files.

Location: Düsseldorf
My B&O Icons:

[lechatsurletoit]

5/Removing screws (Torx 2).

6/Corrosion / oxydation wathever you want to call it.

• This reply was modified 2 months, 2 weeks ago by lechatsurletoit.

Attachments:

You must be logged in to view attached files.

Location: Düsseldorf
My B&O Icons:

[lechatsurletoit]

4/Drawing more power than it should (2.9v on a working remote).

Attachments:

You must be logged in to view attached files.

Location: Düsseldorf
My B&O Icons:

[lechatsurletoit]

3/Plastic tabs remaining on the remote. Oh no! what have I done?

• This reply was modified 2 months, 2 weeks ago by lechatsurletoit.

Attachments:

You must be logged in to view attached files.

Location: Düsseldorf
My B&O Icons:

[lechatsurletoit]

2/Corrosion visible from the batteries leaking.

• This reply was modified 2 months, 2 weeks ago by lechatsurletoit.

Attachments:

You must be logged in to view attached files.

Location: Düsseldorf
My B&O Icons:

[lechatsurletoit]

Unfortunately I can’t do a factory reset, when I press the setup button nothing happens, led stays green.

Location: Düsseldorf
My B&O Icons:

[Author]

Posts