Forum Replies Created
-
AuthorPosts
-
Yes the other one same item number, it is a 3xx number with serial 214xxxx
Your numbers seem strange. Sorry my item number is 1250017 and serial starts with 2201. I have number 70x
I checked mine at my dealer when I bought it of someone.
do you have the red button on top? A bit onreal but I bought another one it is coming tomorrow I will look again to verify. This unit should be ok as I checked it again with my dealer and bought it of Catawiki.
<!–more–>So because the BV11 is ML it does not switch in tbe overlay from the BLGW? Sorry I have 6BV only NL. The only thing I can think of is linking it again in the BV 11 to the BLGW. Otherwise email Khimo, they will help
If you have double recources in both systems it will execute double. So kill all macro”s as wel in the BLGW and only use the BLI.
I have only ML sources in the MLGW. All NL sources are in the BLI
i would make a backup of your MLGW delete the sources which are NL
Did you try the bridge if your lamps work in the Hue Bridge. If so indeed a static ip in your router is the way to go.
I have had 2 pair of 9’s sold one pair kept the other in the bedroom. (Made them white so they blend in a bit)
You either love them or hate them. I like them a lot otherwise I would not have bought a second pair. I do not like the 20 it is a bit more clinical. I doubt a 19 will do anything with the 28 though? Why don’t you ask the shop to hook one up for you so you can listen.
Chucky
16 February 2023 at 20:18 in reply to: Beolab 8000 – Passive ML – Eye – Beosound 9000 -> Wifi streaming? #43505If you pick up a core hook a iR to it if you have a beo4. I would keep my ML System a live though. That way you can play anything everywhere with an NL/ML converter.
I had a whole wired ML house and gradually replaced everything except my BS 9000 which I think is Iconic. When you do hook up a core to your BL 8000 your BS9000 becomes IR Unresponsive so it is not broken. You can buy a PL plug from steve to make it responsive again and hook it up to the core through coaxial to optical or through the ML converter
This gets complicated so either google a lot ask around and do not get frustrated or get an installer in.
Good luck on your endeavour!
Chucky
I think a new topic would be the way to go. Does this mean I can trigger any action through the function keys in HA? I still have some stuff which I would love integrate in the BLI but am limited. I can create a scene pressing a function button on the BR1 and can create anything?
I bought 2 they work really well thanks!
You can use the BR1 in ir mode or Bluetooth, not both. There is a work around but you need to press a million buttons. The only sollution I see is getting a BLI with interface for lutron, but it will be very expensive. I bought this
but I already had a BLI. You can also use an essence remote in IR mode still 2 remotes but it looks nice on the coffeetable.
I would not keep my hopes up on the blinds. Yes if you buy Ikea but if you use somfy IO or Douglass Hunter it will take at least a few years. The say that it is being supported but i still use the tahoma and HA through the BLI. It is still to difficult to setup through zigbee. I am not worried that the current BLI will not support matter, it is just an interface.
It will be interesting to see what the do with the Mozart platform. Could be that you need a next Gen, it will be my third interface in 5 years in pro mode. I think I am going to pass on that one.
I use it not just for light, but heating windows curtains sprinkler etc. Annoying is that I already need HA for windows and alarm anyway. So I have running HA on an docker 24-7 anyway. The good thing of the BLI is the interface it looks so clean and easy to use.
Chucky
Welke beovison heb je? Het zal via een puc wel gaan.
It is not that difficult: just install the driver in the BLI
-
AuthorPosts