beolab 3500 and bluetooth streaming issue

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #8188
    ruben1975
    BRONZE Member
    • Topics Started 3
    • Total Posts 6

    Hello, I have a Beolab 3500 connected with a Logitec bluetooth receiver. I stream music with an Iphone 8. The issue is that the volume is very loud. If I set the volume on the Iphone at minimum its very loud. I checked the bluetooth settings of the Iphone. I’m using a cable from Soundsheavenly. Anyone a suggestion?

    #8189
    Guy
    Moderator
    • Warwickshire, UK
    • Topics Started 10
    • Total Posts 393

    Have you tried using a B&O remote (Beo4 or Beolink 1000) to reduce the volume of the Beolab 3500?  It seems that the BL3500’s default (switch on) volume is set too loud – a remote will allow you to reduce this.

    #8191
    ruben1975
    BRONZE Member
    • Topics Started 3
    • Total Posts 6

    with a streaming device you cannot use a remote to controle the volume, only with the streaming device.

    #8194
    Guy
    Moderator
    • Warwickshire, UK
    • Topics Started 10
    • Total Posts 393

    with a streaming device you cannot use a remote to controle the volume, only with the streaming device.

    I mean the volume of the BL3500 – this can be controlled independently with a B&O remote, regardless of the level of the line input from the Bluetooth receiver.

    #8197
    ruben1975
    BRONZE Member
    • Topics Started 3
    • Total Posts 6

    and how is that done?

    #8198
    Guy
    Moderator
    • Warwickshire, UK
    • Topics Started 10
    • Total Posts 393

    With a B&O remote control.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.