Beocenter 9300 Puffer Battery

[Stefan Guenzel]

Hallo liebe Community,
ich wollte heute an einem günstig erstandenen Beocenter 9300 die Pufferbatterie ersetzen, bevor ich das gute Stück weiter reinige und aufstelle. Leider habe ich die Batterie nicht an dem Platz gefunden, an dem sie – laut einiger Videos im Netz – zu finden sein soll. Angehängt habe ich Fotos von dem Bereich (rot gekennzeichnet), in dem die Batterie “eigentlich” sitzen und sichtbar sein soll. Kann mir jemand helfen und sagen, wo sie sich versteckt hat ggf. zu finden ist ?
Ganz herzlichen Dank!
Gruß!
Stefan

 

Attachments:

You must be logged in to view attached files.

Location: Pulheim
Favorite Product: Beocenter 9300

[Guy]

(Sorry for reply in English!)

Unlike the BC9000/9500, the BC9300 is based heavily upon the BC2300/2500 and the battery is located in a different place, under the metal cover of the microprocessor on the main PCB in the centre of the Beocenter.  This thread may help:  https://forum.beoworld.org/forums/topic/beocenter-9300-no-life-almost/

Location: Warwickshire, UK
My B&O Icons:

[Guy]

I think that the microprocessor board with the metal cover is under the PCB marked in green:

Location: Warwickshire, UK
My B&O Icons:

[Stefan Guenzel]

Hello Guy!
Thank you so much for the quick answer on a friday evening 😉 and all the best from Cologne to the UK 😉 I just checked the BEO 9300 and I think you are absolutly right. The battery seems to be located under the metal cover under this PCB you marked in green. That seems tricky. I hope that I can remove the PCB without damaging these very small cables cause I totally have to remove this PCB. Do you think I can remove the cable sockets without damaging or just leave them at the PCB trying to get under it ?
Have a great weekend!!!!

Stefan

Attachments:

You must be logged in to view attached files.

Location: Pulheim
Favorite Product: Beocenter 9300

[Guy]

Stefan Guenzel wrote:

Do you think I can remove the cable sockets without damaging or just leave them at the PCB trying to get under it ?

I think that you can just leave the cables connected, unclip the PCB from the black clip on the right hand side and then rotate it up and to the left.  But you might have to remove the microprocessor board so that you can solder a new battery from underneath.

I am more than happy to help – I have the 6-nations rugby (France v Wales) on another screen and a nice glass of red wine! 🍷

Have a good weekend! 😀

 

Location: Warwickshire, UK
My B&O Icons:

[Stefan Guenzel]

Thanks Guy! Will try tomorrow. Good luck with the game and enjoy the red wine!!!!!

Location: Pulheim
Favorite Product: Beocenter 9300

[Author]

Posts