DIY Stereo Input – Beocenter 9000/9500

[AW_S]

Hi there! I’m the happy owner of a Beocenter 9000 and 9500.

I wish to benefit from the stereo capabilities of this beast however I realized by looking into the service manual that all inputs are mono.

Are you aware of any modifications that allow stereo input ?

[pepps]

<p style=”text-align: left;”>Hi,</p>
When you say ‘all inputs’ do you mean the DIN type sockets for connection of a Phono and/or Tape2? These are stereo inputs – much the same as with almost all other Beosystems of the time.

Julian

Location: Kent, UK

Favourite Product: Beosystem 6500

My B&O Icons:

[marc spudsy]

i am using an echo dot as my main input device into a 9000, via a din to phono cable, this gives me stereo in and stereo out, yours should too

[AW_S]

Hi pepps, thank you for your response. I did not know either of these were stereo as I solely based myself on the service manual diagram (see attached).

 

Now, do you know which pins from the DIN correspond to L/R and ground? I am making the cable myself.

 

Thank you ! 

[Guy]

The diagram that you posted just shows datalink – hence being headed ‘computer system’.  The diagram that you need is in the same service manual as follows: (pins 3 and 5 being L and R)

Location: Warwickshire, UK

My B&O Icons:

[Author]

Posts