Totz

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: BG 5500 Arm string ankers broken #43620
    Totz
    BRONZE Member

      Thanks for your good suggestions. A simple bolt and nut worked perfectly as well. Just be careful while taking the two gliding elements out of the plastic fixtures to install the bolt. These could become brittle with age? Follow the instructions to reinstall the string properly thereafter and it works well!

      in reply to: BG 5500 Arm string ankers broken #43618
      Totz
      BRONZE Member

        I think I take this back. Looks like the pictures are pretty well the same as for the 7000.

        My only challenge will be to bring the small screw into the proper place from underneath! Not much space and I do not dare to ‘work’/lift that part of the arm.

        But thanks again!

        Erich

        in reply to: BG 5500 Arm string ankers broken #43617
        Totz
        BRONZE Member

          Thanks a lot for your efforts, Christian.  Unfortunately th BG 7000 differs probably considreably from my BG 5500.

          in reply to: BG 5500 Arm string ankers broken #43615
          Totz
          BRONZE Member

            Thanks a lot very helpful. Challenge will be to put a small screw and bolt (best?) into that hole as an alternative to the missing/broken plastic part (as it probably was).  Can you easily lift the gliding part from the 2 trails for easy access? Or do you have to remove these first as well?

          Viewing 4 posts - 1 through 4 (of 4 total)