[steelpan]

Thanks for the information: by adjusting the timing between the two presses of “menu” I could indeed get into the test menu. 00 then showed “sw: 2.0”.

[steelpan]

When I press Menu it activates the timer with display “On 0:00”.

Serial No: 18352475

the document with the MLGW compatibility is attached. You can find it on the site https://mlgw.bang-olufsen.dk/source/documents/

[steelpan]

I removed it from the wall and the type plate shows sw: 2.0 Type No:1601.

Is there a way to update the sw to version 3.3 as needed to reroute the light/control commands?

[steelpan]

Hello,

It is in a working setup with BS5 as audiomaster and a beolink converter NL/ML as videomaster to get access to my Beovision Avant 55 MKI.

All commands seem to work properly.

[steelpan]

Hello,

I would like to reroute the light commands from my BL3500 to my Beolink Gateway which is only working from sw version 3.3.

I tried to find out the sw version of my BL3500 (from 1994) but neither combination (“Menu Menu 00 go” or “Menu 00 go” worked. Any idea what can cause this?

Kind regards,

Luc

[Author]

Posts