SimonR

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Arm balancing for Beogram 1800 type 5811 #33833
    SimonR
    BRONZE Member

      Your suggestion for releasing the arm worked fine.

      However the counterweight still hits the cover at the back before balance is achieved. With the counter weight just clear of the back, the arm rests on the record but so lightly that the anti-skate stops the arm going in. I simply added 1g (half a turn) and am now using it on that setting.

      in reply to: Arm balancing for Beogram 1800 type 5811 #33831
      SimonR
      BRONZE Member

        To get into ‘record playing mode’, I guess the only way is to start playing a record, then cut the mains.

        I have tried to adjust to zero tracking force by winding out the weight. However the weight hits the cover while the arm is still resting on the record.

        This video shows the actual player and its automatic control of the arm: https://www.youtube.com/watch?v=qyKpejRJfbQ

      Viewing 2 posts - 1 through 2 (of 2 total)