Forum Replies Created
-
Interesting, were you able to find direct replacements for the super tweeters?
Location: Silicon Valley
My B&O Icons:
Thanks, that’s reassuring 🙂 In other washer-related notes, it’s interesting how there are both front and back black (cardboard?) washers for the two screws that secure the heat sink. The ones on the outside back of the machine are easy enough to get right, but I’m guessing the interior ones were constantly lost. (I found both of mine lurking in the bottom tray of the BeoCord…)
Location: Silicon Valley
My B&O Icons:
Here is a scan of the 1989-1990 MCL2 System Guide that I have:
https://archive.org/details/Bang-Olufsen-Master-Control-Link-2-System-Manual-89-90
It’s for the North American market, which may make it of special interest. The NTSC MX5000 and VX5000 are big focus of the publication. I’d be especially interested in how it differs from the “March 1990” one in @Madskp ‘s post!
Most of the in-wall installation items at the end are European — however, I have some North American wall parts in my collection that I’d like to document as well.
Location: Silicon Valley
My B&O Icons:
Would it be of interest to get these scanned and uploaded somwhere — or are they already in the Members section?
Location: Silicon Valley
My B&O Icons:
Just wanted to say thank you to @lausvi for uploading this! I have a two-way 6500 and would happy to dump the ROMs in case they aren’t already preserved. Can I ask what hardware you used to do yours?
Location: Silicon Valley
My B&O Icons:
Wow, this is really great! I’d be glad to test or assist in any way I can after it’s released.
One particular use case I’m curious about would be a “smart” interposer device, for units such as the BeoCenter 2300 with only one AUX port. In theory this could intercept a start signal from either a BeoGram or a BeoTooth, and allow just that device to switch the 2300 on to that source. (A kind of automated version of the old four-port AUX Expander.)
Is there any equipment you would like to see it tested on? I have a MCP6500 and BL7000 for example…
Location: Silicon Valley
My B&O Icons:
I was flying through Kastrup and had a chance to demo these. Beta version of the firmware, obviously, but they sounded quite nice. They were demonstrated with spatial/Atmos music, which isn’t quite my taste, but I thought they were great otherwise.
They are of course on the AirPods model, but with a satisfying heft and solidness that contrasts with the plastic of Apple’s earbuds. (Disclaimer: I use both regular AirPods and AirPods Pro every day and think they are some of the best things Apple’s ever produced.) The solidity doesn’t feel too heavy or uncomfortable — but it does give them a nicely different feel from other earpods.
The price will be what most folks take away from this product, of course, — and not in a good way. I suspect many will be bought on international transit to save the VAT/MOMS for participating countries. They offered me a chance to do so on a pre-order basis, but I’ll be back in Denmark in December and will take another listen then.
Sorry this is short on audio details; my takeaway was “really quite good” in terms of playback quality.
Location: Silicon Valley
My B&O Icons:
Good to see people keeping this set working! Were any of the capacitors hard to get, or were they pretty much all available?
Location: Silicon Valley
My B&O Icons:
Bumping this thread to note that it appears Atlantic Systems in Hanover, MA has now closed; does anyone know the details?
I had visited both their original location and their new smaller shop when I lived in the Northeast, most recently around 2022 – I was sad to discover they are gone.
Location: Silicon Valley
My B&O Icons:
A quick link to some pictures of assembly:
https://www.flickr.com/photos/peterl/albums/72177720322347136
Despite my slightly dodgy soldering skills, everything works! The attention to detail on these kits is amazing, from the flush-mount LED, to the molding of the case itself, to the label, to the cable strain relief. Highly recommended!
Location: Silicon Valley
My B&O Icons:
Many thanks for these ideas! Upon re-testing both the good and bad speakers, I discovered there is no continuity on the bad one (and thus obviously no ohm measurement.) The known-good woofer both shows continuity, and also reads out 5ohms.
Tracing a broken internal wire seems a bit easier than other problems, so I will start with that!
Location: Silicon Valley
My B&O Icons:
