pierre69

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • pierre69
    BRONZE Member
      • Lyon, France

      Just a little feedback.

      It’s been a little bit more than one year since I have made the modification with the heat shrink tube as describe above. My beousound 9000 is still working great. I use it nearly every weekend.

      I still enjoy watching and listning to it like the first day.

      Pierre

      in reply to: Beosound 9000 MKII broken… #50895
      pierre69
      BRONZE Member
        • Lyon, France

        Lesbart, this is exactly the problem.

        If I mix MKI and MKIII service manuals, sometimes I can find what I am looking for, but not everytime.

        in reply to: Beosound 9000 MKII broken… #50892
        pierre69
        BRONZE Member
          • Lyon, France

          Thank you very much for your help !

          This is the document I have got. You can see that some diagrams can’t be read.

          I think there is only this version avaible on internet…

           

           

          in reply to: Beosound 9000 MKII broken… #50890
          pierre69
          BRONZE Member
            • Lyon, France

            Hi all and happy new year !

            I have found a service manual for my MKII BS9000. But the quality is really poor… I can’t read several diagrams. Especially the Diagram J

            Does anyone knows where I can find a good quality version ?

            The MKI and MKIII service manual are too different to be used.

             

            Thanks in advance

            Pierre

            pierre69
            BRONZE Member
              • Lyon, France

              When I took off the old worn damper on my BS9000, I measured it with my caliper. The outside diameter was 3.60mm.

              I forgot to measure it with the heat shrink tube on it. But I think, the diameter is around 4.00mm.

              An OD of 4.00mm seems to be the right dimension.

              pierre69
              BRONZE Member
                • Lyon, France

                I’m so glad that this topic can help you !

                pierre69
                BRONZE Member
                  • Lyon, France

                  Thank you Matador,

                  Yes, I will make a feedback in several weeks.

                  There is one thing I have noticed when I opened the unit, is that the damper was moving freely around the rocker arm. Is it normal? Is it due to the wear? I don’t know. With the heat shrink over it , the damper is more tight on the rocker arm. That’s the only difference.

                  Will the wear out faster ? I don’t know, time will tell.

                  For the moment everything is fine.

                Viewing 7 posts - 1 through 7 (of 7 total)