paul.70

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: The New BG4000C #61907
    paul.70
    BRONZE Member
      Hi Steve.

      Just got mine back (4002) from Multicare. It sounds amazing connected to my Shape. I made the cabinet myself complete with integrated Halo remote charger and music sync LED’s.

      in reply to: Beosound 9000c pictures #61906
      paul.70
      BRONZE Member

        I think it looks great. I would love to know if they will offer the same service for the BS9000, as they did for the 4000c program?

        in reply to: The New BG4000C #61902
        paul.70
        BRONZE Member

          Couple of things here…..firstly does anyone have any pictures of whats inside the new turntable? Secondly I read somewhere that B&O where offering to upgrade existing 4000x turntables to the new spec…..what are they changing out and more importantly what are they going to do with the component/equipment they remove during this excercise….

          There’s no question that it looks very attractive, and that its modelled on a 4002 unit. In my view it lacks the over engineered and massively complicated charm of a 4000 deck, the boolean logic controlling the 4000 is a work of art in itself…and the delicate reed relay stop start circuit is just so baffling that i suspect it must have been reverse engineered from an alien spacecraft dug up from the gobi dessert ;¬) And does anyone know what the device is that Eric is injecting the circuit board with is, soldering flux perhaps. Looks like he is upgrading an existing deck from the oxidation on the internals, an old Elco Capacitor and the tone arm solenoid coil looks like it has warmed up the insulation over time…is image 2 the finished article Steve?

          Hi Steve.

          Just got mine back (4002) from Multicare. It sounds amazing connected to my Shape. I made the cabinet myself complete with integrated Halo remote charger and music sync LED’s.

          Attachments:
          You must be logged in to view attached files.
        Viewing 3 posts - 1 through 3 (of 3 total)