[paddy2042]

My BS9000 seems to have just given up the ghost and will not play CD’s any more so I will take up this discussion once I get it going again. Many thanks for the suggestions.

 

BTW I did disconnect the Masterlink and it has worked eventually I think.

 

paddy2042

[paddy2042]

Sorry a bit of confusion. There is no BV8 in the equation as this is toehold TV that has been replaced by a Samsung!

It is BC2 BS3 and BS9000 that are plugged together with the 9000 cabled in another room. It is this 9000 for playing CD’s that will not take any commands from the main room. It used to work with the BV8-40 but will not with the BS3.

 

I tried your trick of removing the Masterlink for the BS3 but it made no difference.

 

DVD in BC2 is connected to BS3 via SCART and does work with the Masterlink removed as you suggested, but it worked before. This is a real conundrum and very annoying.

 

Thank you for your suggestion as I am willing to try anything to get it working again.

 

Paddy2042

[paddy2042]

Thank you for your reply.

The BC2 is connected to Bs3 by SCART and Masterlink and the BC2 is usually used to play DVD’s or Cd’s if you press DVD on the BEo4. If you press CD on the Beo4 you should get the other room BS9000 to play which its does not do now.

 

The cabling is the same as I used before.

 

Regards

 

Paddy2042

[paddy2042]

Thank you for your suggestions. I will continue my research.

paddy2042

[paddy2042]

Thank you for your advice, I suspected this may be the case. Just out of curiosity is it viable to replace the screen of a BV8-40 screen? The rest of the TV is fine except for the broken screen and the hideous sticky black coating on the frame! If it was financially viable I could go this route. I would be interested in your opinion.

 

Many thanks

 

Paddy2042

[Author]

Posts