NPC59

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: Beosound 9000 Audio Problem #46167
    NPC59
    BRONZE Member

      Right. And I‘ve learnt quite a bit about my Beosound in the process. Great forum that I hope I won’t need again. I‘m going to get a new Aux adapter and will let y‘all know if it works.

      in reply to: Beosound 9000 Audio Problem #46165
      NPC59
      BRONZE Member

        Genius mate! I disconnected the AUX and I have both channels again. I‘ll now have to see if I can continue using the AUX to input from my airport express though.

        Many thanks, Guy

        in reply to: Beosound 9000 Audio Problem #46163
        NPC59
        BRONZE Member

          Didn’t think of that. Unfortunately I still only hear one channel ?

          in reply to: Beosound 9000 Audio Problem #46161
          NPC59
          BRONZE Member

            And each speaker has its own PL cable.

            in reply to: Beosound 9000 Audio Problem #46160
            NPC59
            BRONZE Member

              Done all the checks including the headphones. Inly get one channel on my cheap ear buds.

              in reply to: Beosound 9000 Audio Problem #46158
              NPC59
              BRONZE Member

                It doesn’t appear to be a cable issue. When I switch the speakers to „L“ and turn the volume up I can hear the channel faintly. Looks like it might be in the amp.

                in reply to: Beosound 9000 Audio Problem #46156
                NPC59
                BRONZE Member

                  Thanks for the hint. There is no sound coming out when the switches are set to „R“. Guess that means the right channel is defekt. Is there a fuse that I could check?

                  in reply to: Beosound 9000 Audio Problem #46152
                  NPC59
                  BRONZE Member

                    Can you please explain? I discovered the problem when I checked the input theough the Aux port. And when I play a CD and adjust the balance it is clear that only one channel is getting through. The strange thing is that the channel plays on both speakers and when I dial down the balance both speakers go quiet.

                  Viewing 8 posts - 1 through 8 (of 8 total)