[mPartio]

Steve at Sounds Heavenly wrote:

Hi, This issue shouldn’t occur normally, but several factors can bring it on. Lack of grounding to the digital amps in ICE Power speakers can cause a low frequency mains hum or buzz sound, but this was described as a high frequency buzz in the original post, which sounds like something different…

 

I know this is an older thread but I have the same problem but appears to be a ground hum. Steve can you describe some of those factors you mention or some advice to make sure things are grounded well? I’ve also got a mix of bl3 and BL12-3s with combination of cat 8 and converter dongles driven by a BeoSystem4.

[mPartio]

Thanks Millemissen for confirming.  And yes I meant the internal app.   I kind of wondered but really thought I saw it try to connect at one point when setting everything up.  The Moment has no problem connecting to Deezer so I was optimistic it could still but, as you pointed out, it’s easy enough to link it to the Moment or one of the cores, etc.

[mPartio]

OK, I figured out what must of been a silly question for most of you.

I’ve just switched from a MasterLink-centric network with a few NL products (with converters) to an NL network with a few converted ML products (with converters) and was still thinking through the MasterLink paradigm lens.

I guess I had always thought of the connected products having to deal primarily with integration ( audio-master & video-master) but after setting everything up it’s clear that’s just how you make products visible to each other on the network.

Any integration option is a secondary feature within that.

It’s been a few years.

A lot to catch up on:)

 

 

[mPartio]

I seem to have answered my own question.  At least for the customer service menu which is MainMenu->Setup

then:

red + center “go”

Does anyone know if there is a normal service menu (like 0 0 go)

I can’t access one like on the BS3, however it may not exist on this model.

Can anyone confirm?

 

[Author]

Posts