leonardo.buffa

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
16 June 2023 at 14:38 in reply to: Beosound Century CD lens replacement – difficulty removing the old lense #35420

leonardo.buffa
BRONZE Member

Problem Solved: there was a flat cable with no good contacts, removing e reinstalling the CD became responsive again. I confirm the classic “Focus Error” I tried to clean but no luck, after this CD starts but randomly I get Radial Error or Focus Error. I dismantle another Century and I took just the laser module with lens, keeping my electronics, and it works. I found online the spare part in Germany and I’m waiting for it.

9 June 2023 at 10:03 in reply to: Beosound Century CD lens replacement – difficulty removing the old lense #35419

leonardo.buffa
BRONZE Member

OK I did some test and… I’m quite sure the problem is CD power supply.. doing the same (maintenance, codes, etc) in another Century the laser moves, in mine nothing happens… I have to better investigate where’s the problem, radio, cover, CD lid works.. the problem seems to be only on the laser circuit

8 June 2023 at 14:09 in reply to: Beosound Century CD lens replacement – difficulty removing the old lense #35418

leonardo.buffa
BRONZE Member

Hello thanks for sharing this interesting video, I’m going to follow it but before I have a question: in maintenance mode, when I give code 40, 42, 44, etc, nothing happens… I’m guessing there’s another problem? (I have a Century 2651 MKII it should be the same of this)
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)