Kawasakiinit

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: BeoGram 5500 arm adjustment #40541
    Kawasakiinit
    BRONZE Member

      hi guys i have the beogram 3300 with similar set up . my arm judders when it returns just prior to stopping . i havent noticed the adjuster on the first pic near my arm ,would this adjustment sort my judder out ?

       

      here is the video of the judder..

      thanks

       

      in reply to: Beocentre 9300 memory battery #50347
      Kawasakiinit
      BRONZE Member

        That’s brilliant thanks I’ll have a look for it in the 9300.

        ?

        in reply to: Cdx blowing internal fuse instantly #48774
        Kawasakiinit
        BRONZE Member

          Thanks guys

          Really sorry for my lack of knowledge I’m just trying to learn .

          I’ve manged to get a schematic for this power board and indeed the caps are correct as they are .

          Are there any common fuse blowing issues with this unit I should look into . I have today taken all the mosffets ? off the heat sink and am now waiting for my component analyzer although i think they are ok as the board actually doesnt blow the fuse when the other boards are not plugged into it. the plug that does blow the fuse is the one that goes to the disk drive , Any ideas please ??

          thanks again Dave .

           

          ps what is the component that goes from the board where the  audio cables are soldered on to the heat sink (mosfet screw ) googled it but nothing ??

        Viewing 3 posts - 1 through 3 (of 3 total)