[gpapilaris]

Hi Beouser66- it worked! embarrassed I didn’t see this myself, thanks!

[gpapilaris]

Madskp- thanks for the information, I’ll be very careful or just leave it alone!

[gpapilaris]

Hi Madskp- if you’ll permit, I have a different question. I was going through the Connections menu of my BV7-55, in the Sound Adjustment section, there are 2 Default Speaker options, Default Video= Speaker3, Default Audio= Speaker2.  The manual states these defaults can be changed but is silent on how to change them.  I now use the Beo4 remote to change Speakers wondering if I can just change the Default and be done.  Is there a menu option that shows how many hours the TV and DVD have been used?  Manual is silent on that also.  Thanks in advance, regards George

[gpapilaris]

Many thanks to you both for helping me with this.  So far everything still works but I now have a way to keep CD player working if I have to replace my TV.  Regards, George

[gpapilaris]

This may be the answer I’m looking for.  I’m running everything through BV-7 now including BS9000 connected by ML.  When the BV is no longer functional, I know I have options to use my stand and B&O speakers with a modern TV, it was the 9000 that I couldn’t figure out.  How do I change to A-Option 1 to run the 9000 in linked rooms?  What happens to ML connection at the BV7?  I control with a Beo4 remote.  Thanks

[gpapilaris]

Hi Beouser,

Thanks for asking but I now understand the problem. Since B&O abandoned master link the only way I can maintain my current set up is by replacing my old master link tv with another old master link tv.  I can update to a new tv and connect my B&O surround to it without the BS9000 and master link.  Then possibly I can rewire the master link connecting only the BS9000 to the speakers in the linked rooms but I’m not sure about that either.  Since I live in the US it is very difficult to find people who understand master link and are available to help with changes.  Sorry to be so long, I do appreciate your help

[gpapilaris]

It looks like I can attach everything to the decoder, do you know if I can use the B&O remote to control the system?  I’ll check with almando to see it it will work with US electricity  Thanks!

[Author]

Posts