[Capt’nGerard, formerly known as Gaea]

When you look on dk-soundparts.com and look for ‘fuse’ you will see how they look like.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

There are I believe 3 fuses, but they don’t look like fuses.

more like capacitors, they are soldered on.

Maybe check out a service manual or check the printed text on the pcb’s

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Du kann mit Deinem handycamera sehen ob Deine fernbedienung funktioniert.

Knopf auf fernbedienung eindrücken und durch handycamera gucken auf das IR auge, dann kannst du sehen ob es leuchtet.

 

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

🍻

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

After pressing tv, choose source, and press ok.
Otherwise try other cables between tv and Stage.
The BR1’s signal travel thru the cable to the tv.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Listen to the Severed Hand and replace the lan cable between Theatre and TV.

B&O seem to buy their Lan cables at Temu and/or Shein. Utter crap.

Aliexpress has even better cables.

All the comms between BR1 and tv go thru the lan cable.

I binned that cable out of the box.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

What actually would you like to control exactly on your PS5?
I have a PS4, and no idea what to control with a BR1?

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Has the black foam been replaced?

 

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

rpaul wrote:

I also get this message (your Bang & Olufsen Product has been disconnected…)

Yes, excactly the same message I get when I pull the HDMI cable out the tv on purpose.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Yes, the lan cable shipped with the Theatre is utter garbage.
From the box straight into the bin so it won’t cause any harm.

A 10 grand soundbare shipped with a 50ct lan cable, how much harm can you do to your own brand?

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

I know the ethernet cable provided with the Theatre is garbage, but I don’t know with the Stage.

Swap out your cables first, after that you can complain about B&O’s Stage firmware.

your Beoremote’s commands travel through those cables to the tv.

that your cables where fine before is zero guarantee, they can just give up after a while.

As far as I know the Stage is rock solid.

 

 

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

You could use Beolab 3, 4000,17, or 8 high up on the wall or ceiling with the appropriate brackets.

or use celestials, but they are passive speakers and need a seperate amp.

The Theatre can do the room correction once it knows wich speakers are connected.

This measuring is suprisingly accurate.

The is a technical soundguide on how to do this, but I don’t know where to download it.

Someone else can jump in here.

you can use Wisa, but be aware that when your Wifi router is hopping channels it can cause disturbance.

Setting your wifi router manually on one channel and/or on 2.4 or 5g is very helpful.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

You can use all of the Beolabs from the eighties onwards

you choose the right model from the pull down menu when configuring/adding them to the Theatre

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Kose trading has a YT video where they take the BC2 apart.

Very helpful.

 

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Ron had one for me, it is underway to me.
Thanks again

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Ik heb toen ik deze had altijd op auto update staan, maar de software is altijd blijven staan op die van 2013.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

Thanks!

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

If there are no microscope photos (usb microscopes are cheap)  availlable, assume that a secondhand needle is worn/broken and needs retipping.

Buy a cheap mmc4 and have it retipped, then you are sure of a good quality needle or stylus/cantilever.

Don’t ask me why I know this…

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

You need a service manual too, and Kose Trading has a Youtube video how to dismantle it.

I have replaced these belts too, the clamper belt was hard to source but I got it from a dealer who was not alowed to sell it on…🤐

 

I still need a fix for the sticky clamper, there seems to be a fix for it, but I haven’t found it.

Location: Netherlands

[Capt’nGerard, formerly known as Gaea]

https://forum.beoworld.org/forums/topic/masterlink-usb-adapter/
here it is

Location: Netherlands

[Author]

Posts