[FoleyTiemann]

Hello Christian ! Very grateful for your help! I sent a mail to Beolover explaining the problem with videos, waiting for his answer, but now with your reply I know from where to begin, … thank you very much, I’ll keep u in touch with the process !!

All the best from Spain ☺️

Antoine

[FoleyTiemann]

I would like to ask for ur help considering my Beogram 4000 .  I started having some problem with in last months, the needle was not able to go backward and very slowly forward .. I changed the 4 transitors TR 28-29-30-31 .. and now I am having those following problems:

1. when turning on the beogram goes always to 45rpm even of i turn it off on 30rpm.

2. The needle goes down before reaching the disc , almost an inch before.

3. When i put it on 33 the arm raises up and goes back to the begining.

4. Even on 45 the arm without any reason raises up and goes back to the begining.
5. Going forward it also do a lot of lapping ..

I hope u can give some tips to know where the problem must be,  I tried so many thing with no results ..

thanks guys, have a great day u all !

[Author]

Posts