Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Epic B and O

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • in reply to: Beocenter 9500 controller PCB assembly #61214
    Epic B and O
    BRONZE Member

    Hey mate

    i haven’t.

    when you keep your finger on the rubber bumper, they flash for a second

    michael

    in reply to: Beocenter 9500 controller PCB assembly #61200
    Epic B and O
    BRONZE Member

    Hey mate

    Thank you for your reply

    Unfortunately it’s not the glass, because the buttons are still not working when you touch the rubber bumpers directly

    Regards

    Michael

    in reply to: Beocenter 9000 button fault #60361
    Epic B and O
    BRONZE Member

    Thank you so much.

    I will check the ribbons and the connections.

    All else fails, I have found a Hi-Fi service in Perth WA. Hopefully they know their way around Bang and Olufsen.

    Just want it to work and sound like it did when I bought it in the 90s

    in reply to: Beocenter 9000 button fault #60353
    Epic B and O
    BRONZE Member

    Thanks for your reply mate.

    The buttons aren’t working even with the glass panel removed.

    I am worried I damaged a wire or board when trying to prop up the cover.

    I don’t have the remote anymore unfortunately.

    Also apologies, it’s a Beocenter 9500

    in reply to: Penta unusual loud noises. Like loud Scratching #52862
    Epic B and O
    BRONZE Member

    Hey mate,

    I have the same problem. It’s  corrosion on the input level switch.

    I had a complete overhaul of my Penta’s, but unfortunately they missed the switch. So at the moment I’m living with it by switching the problem speaker to another input level.

    I have the Beocenter 9500 also since the 90s. Absolutely love it.

    I’ve attached photos of the problem switch.

    if you find a fix please let me know.

    hope this helps.

     

    in reply to: Beocenter 9500 sound problems #48911
    Epic B and O
    BRONZE Member

    Ordered 4 new drivers from Austria.

    Hopefully this fixes the muffled sound.

    Another thing I noticed was that the tweeters would occasionally cut out. I’ve checked the connections, and they all seem ok.

    in reply to: Beocenter 9500 sound problems #48909
    Epic B and O
    BRONZE Member

    Thank you for your help mate.

    To be honest I think I’ll just buy new drivers. Had these speakers since the 90s, and want them to sound like new.
    One thing I noticed which I’ll recheck later, was that there wasn’t much sound coming from the tweeters. If there’s a n issue with them, that would also explain the muffled sound.
    I’ll check the 8pin din sockets also

    in reply to: Beocenter 9500 sound problems #48907
    Epic B and O
    BRONZE Member

    Many thanks for your help mate

    in reply to: Beocenter 9500 sound problems #48905
    Epic B and O
    BRONZE Member

    Can you recommend a good quality foam kit?

    I live in Australia

    in reply to: Beocenter 9500 sound problems #48903
    Epic B and O
    BRONZE Member

    Yes it wasn’t done by a professional unfortunately.

    I will order new drivers off eBay. My only concern is the part numbers don’t exactly match. The one’s on eBay are 8480232, and mine is 8480239

    in reply to: Beocenter 9500 sound problems #48900
    Epic B and O
    BRONZE Member

    The cables between the Beocenter and Beolab are new, but I’ll check the sockets for the 8 pin din cables.

    I did connect my Penta speakers to the Beocenter, and they sounded ok

    in reply to: Beocenter 9500 sound problems #48899
    Epic B and O
    BRONZE Member

    Thank you for your help.

    Yes I did notice that one of the speakers drivers had a split in the foam, but would that cause both speakers to sound muffled?

Viewing 12 posts - 1 through 12 (of 12 total)