Forum Replies Created
-
AuthorPosts
-
DT79
BRONZE Member@roycke I picked up some new B&O speakers at the weekend including a Beolab 7.2 for which the dealer made me up a cable to take the 5v USB trigger from the TV and the RCA pre-out from my AVR to the powerlink socket.
I remembered this thread and asked him about the issue of the TV’s USB being ‘always on’ and he said that if a TV has a USB that’s always on then it must have another one that isn’t… not sure if that’s true but could be worth checking?
Also if the TV does only have one USB, could there be a some kind of power setting which affects whether the USB is always powered or not?
DT79
BRONZE MemberI think a lot of the decision making is what your living space can accommodate? I have BL90s is my living room – which I can and do live with. However, I would not contemplate additional column speakers or even BL4000 or BL17 as surrounds. I choose BL3 only as the most compact solution as not to be overwhelmingly a B&O showroom. My philosophy would be to get the most powerful Beolab fronts (90 > 50 > 28 > 5 > 20s etc..) you can afford/accommodate and get the most discrete surrounds that suit your individual tastes. I would not worry too much about sonic matching of surrounds. They bring atmosphere first and foremost.
@Mr10% Sorry to say it….I do not agree with you. That the fronts best be ‘massive’ and the surrounds ‘less’, is only part of an answer. Thatis however, when you with your setup are focusing on 2 channel content/aka stereo. If you are someone, who leans more towards watching movies with multichannel sound, the surrounds should ideally – if possible – be equal to the fronts…..we are talking discrete channels for the surrounds nowadays. That is even more important, if you are into multichannel music (SACD/Bluray/Spacial Audio from Apple Music/Tidal…). Apart from the size of the room it also it depends on what you use as the processor for the sound. If you use the Theatre with it powerfull speakers built-in, you best place your additional set of speakers as surrounds….in case you have only one set. For those with the Theatre, who also listen to 2 channel music and not just to movies, best get 2 speakers up front too – if you can afford it, the BL90 or 50. Unfortunately these are only for the few! So there is no definitive answer to the question – it all depends…… P.S. At the last AGM in Struer, there was a demo of 5 channel music (from a SACD) in the main listening/test room. Up front were two BL50’s, as surrounds a set of BL6000, the center channel was the speakers of a BV11……sounded pretty good to me
MM
Unfortunately it wouldn’t have mattered if I’d scaled back on the rears, I would not have been able to get anything significantly better for the fronts and I’m not even in the right life to be dreaming about Beolab 90s! I listened to the SACD 5.1 mix of Wish You Were Here earlier and it just sounded awesome, so very happy with my choice.
DT79
BRONZE MemberBL8000 with BL6000 and the BL7-2 is a classic speaker setup from B&O. First time the BL8000/6000 was used was with the A/V 9000 system, back then with the dedicated center speaker of the 9000 tv part. Later on they were used with the various BV7 variants, now with the dedicated 7-4 center speaker…..and even more often with the 7-1/2/6. Often these are complimented by the sub BL2. These speakers are still used in a lot of homes around the world – they still do an excellent job (when looked after/serviced) and are popular to this day. You can even buy wooden lamellas for them….to make them look more Beo-modern. You have made a good choice – have fun with your setup.
MM
Thanks, I’d spotted that you can get the wooden lamellas – just gorgeous. I’ll definitely get those one day, but they’ll probably cost more than the speakers cost me, so probably not for a while!
DT79
BRONZE MemberWell, I took the plunge on these speakers and got them all set up today. They look so cool and sound amazing. I really wasn’t expecting such an upgrade in sound, I would have been content with a sideways move sonically so I am highly chuffed. The Anthem ARC room correction has knitted them and my subs (2* BK P12-300SB) together just perfectly.
DT79
BRONZE MemberI am also very interested in getting hold of an autonomous signal sensing RCA to powerlink trigger box. I’ve just purchased 5 Beolab speakers for my home cinema system including a 7.2 for centre. Just waiting with baited breath for them to arrive on Wednesday. I’ve purchased them from a second hand B&O specialist who has made me up a Powerlink trigger cable which will be driven from my TV’s USB socket, which seems like the next best thing in a home cinema application, but a signal sensing trigger box would be ideal so I don’t have one annoying visible cable going up to the TV!
DT79
BRONZE MemberHi, thank you for the warm welcome and the helpful information.
It is good to know that these speakers were partnered in various packages, that does reassure that they will produce a cohesive end result.
Thinking about it the AVR does have a room correction system so that should align the sound of the speakers even if they do differ slightly.
The dealer I’m talking to has specifically mentioned driver re-foaming so it sounds like he’s done the job properly.
DT79
BRONZE MemberI suppose one obvious question is whether the speakers will all have a consistent sonic signature, especially across the front three?
-
AuthorPosts

