[Beouser19]

Sorry..! TS You have make a BIG misstake if you not write down the old settings becaues its only on sparepart driver you have a label to adjust according to servicemanual , the original is without label (and not adjustable according to servicemanual because of unknown value) you have to use use a microphone and some audioanalyzer and tonegenerator in a quiet room like b&o do in factory

[Beouser19]

How have you test that the riaa stage is ok?

 

[Beouser19]

You need to buy a complete cable the plugs for beocenter 2 cannot be bought

[Beouser19]

Hi

Beolab 8 doesnt support VE 1.0 and 3.0 with Wisa (avant/avant ng/horizon etc

but with powerlink cable it should work

[Beouser19]

if green light lit and tv not turn on, it can be videoengine fault or if lucky cable between VE and BT module

[Beouser19]

Hi,

from ebay? If you get a used dve you can change it by your self, but it have a different serialnumber then, thats doesnt matter if  pincode is known or disabled

[Beouser19]

Hi,

its probably the upper bass amplifier thats need to be repaired/exchange (Ice1000a) normaly a chassi repair thru b&o network

 

[Beouser19]

Bv10 stand are NOT electrical compatible with bv11 stand

bv10 have turn left 5v and turn right 5v

bv11 use CAN bus serial data

[Author]

Posts