BeoWorld Logo
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BeoKei

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • 22 July 2026 at 15:39 in reply to: Beoremote Halo: Realiability in “tougher” areas like bathroom and kitchen? #124631
    BeoKei
    BRONZE Member

    I have a Halo in my bathroom, kitchen and indoor/outdoor garage. I’ve had them since they launched more or less and all of them are still humming along just fine. I did keep the plastic over the glass to help with protection against dust and dirty fingers.

    3 September 2025 at 17:54 in reply to: B&O 7.1.2 Surround system… #69341
    BeoKei
    BRONZE Member

    I am running a a mix of Powerlink speakers and DPL speakers from a Theatre in 7.1.2 format in a 9.1.2 setup. I use 2xBL20, 2xBL28, 2xBS2, BL19, Emerge, & A9. Recognizing that I have a unique setup, I really enjoy what True Image does with my setup and I enhance it by adding more envelopment through the EQ enhancements in the App of the Theatre.

    5 August 2025 at 14:08 in reply to: B&O Core crashes #68333
    BeoKei
    BRONZE Member

    I’ve experienced similar problems with a Core that is constantly on Deezer or Airplay. Every 24 hours or so it will stop being accessible or playable until you power cycle it.

    24 February 2025 at 15:44 in reply to: Low-Budget Multiroom Setup for Ceiling Speakers #63986
    BeoKei
    BRONZE Member

    You simply need a Beoconnect Core. From there you can decide to stay all B&O with the current architectual speakers and Beoamp 2 or using adapter cables you can connect any brand amps and speakers.

    11 February 2025 at 15:35 in reply to: Saving a multi room scene on favorites – Halo #63693
    BeoKei
    BRONZE Member

    You would need a Beoliving Intelligence to pull off a Macro for whole house turn on and joining to your source with one press.

    3 January 2025 at 15:28 in reply to: Using Beoremote One with LG OLED TV and Beoconnect Core #62213
    BeoKei
    BRONZE Member

    The Connect Core only supports volume and standby/on-off via CEC. There is no way to use the B&O App from LG with the Connect Core as it is now. The functionality of the device is not similar to the Stage or the other video products currently.

    16 December 2024 at 15:12 in reply to: Beosound Balance help with preset buttons #61670
    BeoKei
    BRONZE Member

    If you go into the B&O App on your phone you can manually associate the Mybuttons (the buttons you referenced) with any B&O Radio station or Deezer/Tidal Playlist that you like. It seems as if they have lost/forgotten the presets that were assigned to it or you simply don’t have internet for them to playback the preset requested.

    9 December 2024 at 15:06 in reply to: Controlling Non-B&O TVs with Beoremote via BeoConnect Core? #61454
    BeoKei
    BRONZE Member

    Only volume and on/off is possible.

    6 December 2024 at 16:53 in reply to: Halo sw update #61387
    BeoKei
    BRONZE Member

    You need a Beolink Converter to use the Halo for control of the 9000 unless you have the 9000c with it’s updated connection module.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)