asgaard

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • asgaard
    BRONZE Member

      Hi Martin,

      That’s actually a good question. I’m a beginner, so not sure about tracking force, but the cartridge is MMC 10 E .

       

      Thanks

       

      btw. I will post some pics (as I took off the plate) over the weekend

      in reply to: Beomedia 1 (type 1750) #34725
      asgaard
      BRONZE Member

        I’m hoping that someone has a disk image for spare from Beomedia 1.

        Thanks

        in reply to: Beomedia 1 (type 1750) #34723
        asgaard
        BRONZE Member

          I have tested it, looks like hdd is faulty. There is no problem to get a replacement hdd (as in previous link) using adapter to convert from ide to sata, but I have no way of getting software of the Beomedia. All I found online was BeoPlayer, but not sure if anyone of you has a recovery copy of the system.

          Thanks

          in reply to: Beomedia 1 (type 1750) #34722
          asgaard
          BRONZE Member

            Thanks for that, will keep you posted once tested.

            in reply to: Beomedia 1 (type 1750) #34720
            asgaard
            BRONZE Member

              Short update:

              Once it’s turn on, you can heard that the hdd plates are started spinning with clicking (probably hdd faulty) and message came up on the screen as Disk Boot Failure, insert system disk and press Enter. I tried to go to the Bios, but not sure which key on the keyboard should I press, and I tried already F8, F12, F10 but none of them are giving me access to BIOS.

              Thanks

              in reply to: Beomedia 1 (type 1750) #34719
              asgaard
              BRONZE Member

                No, I haven’t tried that, but thanks for a tip. Once I will try I will keep posted.

                Thanks

              Viewing 6 posts - 1 through 6 (of 6 total)