Home › Forums › General Discussion & Questions › Speaker cable length
- This topic has 12 replies, 2 voices, and was last updated 2 months, 1 week ago by Stuart50_1.
-
AuthorPosts
-
17 January 2024 at 17:53 #1309
Hi all
Is it possible to use different speaker cable lengths on a pair of speakers Beolab 20 used for front speakers by an eclipse? Also there are only 4 speaker connection on the panel
I have 5 speakers in total Beolab 20 front Beolab 9 back and a Beolab 2 Sub how do I get around this please.
17 January 2024 at 21:54 #19064Thanks for your help
20 January 2024 at 13:41 #18998Hi
This may explain why I have been underwhelmed by the base response on my set up.
There has been a definite lack of base experience in my set up .
thanks for the information if you have any tips on getting the best out of my set up I would appreciate it .
Eclipse 55 mk2 Tv
Beolab 20 front
Beolab 9 Back
I also have a Beosound 5 connected through a ML/convertor which plays through the speakers when I press join ?
Any help would be great .22 January 2024 at 15:59 #18944@Millemissen and @AdamS,
I’ve started writing the explanation on tonmeister.ca/wordpress.
However, I’ve decided to take the long way, so settle in for an extended series of postings about closed and ported cabinets…
23 February 2024 at 15:18 #18195Help
I have just reinstated my set up Eclips gen 2 beolab 20 front beolab 9 ,back .
Cannot get the beolab 9 to work on speaker connection set up , they do play with the front speaker but not on their own ?
Hi have just ready that you cannot daisy chain from the front speakers to the back speakers is this correct . It advises using a splitter ?
is this correct or is there a work around Please.
KR Stuart
-
AuthorPosts
- You must be logged in to reply to this topic.