RX-2 help please end of record issue

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4471
    equalizr458
    BRONZE Member

      I picked up an rx–2 turntable yesterday at goodwill with cartridge and stylus intact. When hitting start, it starts and set down on record and plays. When getting about 1/4  from end of record it seems to not be able to move any more  keeps trying to play the same groove again,  but if you cue it and move it a bit toward center it plays till end and then returns to home, what could be stopping it at the almost end of record?, will open it today and look inside , maybe a taught tone arm wire? Any helpwoild be great, thanks.

      #4542
      cbtitus
      BRONZE Member

        You will need to open it up to see what is going on. There are some rods and gears that control the tonearm pickup and something is probably getting hung up somewhere. This YouTube is very helpful to show you how to open it up without having to guess at what screws, etc. to remove:

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.