Replacement Terminal Block Connector Recommendation

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums General Discussion & Questions Replacement Terminal Block Connector Recommendation

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #51895
    markg2000
    GOLD Member
      • Topics Started 4
      • Total Posts 9

      I am looking for recommendations for a replacement terminal block connector (minimum 7 wire pairs) for MasterLink wiring (yellow, green, brown, grey, pink, white, shield). The plastic in the original connector has become brittle which is causing some wires to easily pull out of the terminal block (see photo). Thank you!

      #51896
      Dillen
      Moderator
        • Topics Started 3
        • Total Posts 594
        #51897
        Madskp
        GOLD Member
          • Denmark
          • Topics Started 35
          • Total Posts 837

          Here in Denmark they are available at most hardware stores / building centers.

          That said the loose connection is not because of the brittle plastic. The screws are sitting in a metal piece which the cable ends are pushed into. It could be that the cable ends are not pushed long enough in, or that the terminal block is not big enough for three cables at the same time

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.

        Home Forums General Discussion & Questions Replacement Terminal Block Connector Recommendation

        • You must be logged in to create new topics.