NL/ML converter to connect to MasterLink

[Michiel Borchers]

Hello Beoworld,

Great this forum!

Just bought a nl/ml converter to connect my ML gear to Essence MKII.

My setup :

Living room

–       BV10 with BL8000 PL; ML to Distributor box Video connected

–       BeoSound 3000 ML connected to Distributor Box Audio connected. Used for CD and radio

–       BS Essence MKII connected to DVD on BV10; used for digital radio and digital music

–       ML/NL converter not yet connected

Link room (annex Living room)

–       BL3500 ML from distributor box Link 1

Link room 2 (annex Living room)

–       BL3500 ML from distributor box Link 2

I’ve read several posts on MLC; what I don’t understand from which source a ML cable should be connected to MLC?

[Guy]

Hi and welcome to our friendly forum!  Hopefully we can help you get set up and connected.

To answer your question about which ML source should connect – it doesn’t matter!  In a masterlink setup all the masterlinked components are connected in parallel – effectively they all share the same connections.  If you have a spare socket on the distribution box then you can connect to the NL/ML converter from that.

I think that when you come to set up the NL/ML Converter, you will have to set it up as ‘Source Centre’ because you already have a Videomaster (the BV10) and an audiomaster (the BS3000) on your ML system.   However, my experience on NL/ML Converters is quite limited so please have a read of the setup manual (do you have it?) and try to work out what is best for you.  I am sure that other forum members will be able to advise further.

Good luck!

Location: Warwickshire, UK

My B&O Icons:

[Michiel Borchers]

Thank you for your quick response.
The receiver is on its way to me; as soon as I’ll have it I will set it up like this.

[Author]

Posts