NL/ML access

[Bob Avery]

I have been advised to change a config file in my NL/ML Converter by B&O Support. They suggest finding the converter IP address and accessing the settings page using a web browser via a laptop but this does not work.

I need to change the sources linked to the TV command as I have removed Sky HD from the system and the BeoLab soundbar upstairs forces the TV to try to activate HDMI 1 for Sky – but Sky isn’t there anymore and as a result we get no sound from the Soundbar until I go back downstairs and select Live TV.

If anyone can point me in the right direction I would be grateful!

 

[Tignum]

Hello Bob,

The NL/ML converter can be configured with any computer. You can access it like this (from the manual that you best get a copy of!).

‘Connection via an Internet Browser: Enter BLC- followed by the BeoLink Converter NL/ML serial number: [BLC-XXXXXXXX.local].’

Regards and good luck, Johan.

 

 

Location: Netherlands

My B&O Icons:

[Bob Avery]

Hi Johan

I did try ‘BLC-XXXXXXX.local’ but get no response.

Using mac terminal app I have tried ping ‘BLC-XXXXXXXX.local’, this resolves to an IP address but the pings just timeout.

[Tignum]

Hello Bob, instead of the XXXXXXX, you do use the serial number (that is printed on the label on your NL/ML converter), right? Just to be sure :-).

 

Location: Netherlands

My B&O Icons:

[Bob Avery]

Hi Tignam

I can’t see any serial number without taking the device off the rear of the TV, soon as I get a chance to do this I will have a look and see what happens.

The serial number I’m using at the moment I’m getting from a network scanner via my EERO mesh app.

[Author]

Posts