Home › Forums › Product Discussion & Questions › BeoCord › My beocord 6500 won’t do fast forward or rewind
- This topic has 4 replies, 1 voice, and was last updated 1 year, 9 months ago by
69er.
-
AuthorPosts
-
16 November 2022 at 09:38 #40809
I am getting mad.
havinga real nice clean beocord 6500 in front of me. Needed new belt. So I changed. It plays the cassette, sounds good.
but when pressing fast forward it gets stuck and to standby. I changed the cassette part from another 6500 (black). Same issue. I changed the motor pcb. It worked one time. Then changed all capacitors on the motor pcb. No change.
disasembled the complete drive, cleaned, new belt.
it plays, but still no fast forward or rewind.
what is wrong?
it’s the version with one belt and two motors.
measured the voltage on the second motor, but don’t know the target values (seems to low)
hoping for help
69er
16 November 2022 at 23:37 #40810It’s totally weird.
now sometimes it works sometimes not.
after rewinding 5 times in both directions I reassembled the whole thing together and now it doesn’t rewind again (with housing).
????
16 November 2022 at 23:40 #40811And now it works again
i am getting mad
17 November 2022 at 18:10 #40812Its still not winding as it should – any idea here?
21 November 2022 at 00:40 #40813i found the error – see my other post
-
AuthorPosts
- You must be logged in to reply to this topic.