How to integrate BS Essence into BV14-55

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #8151
    SirPump
    BRONZE Member
    • Topics Started 2
    • Total Posts 3

    Can anyone help me to successfully integrate the Beosound Essece Mk2 into my Beovision 14-55. Which setting do i need to make?

     

    With thanks!

    #8159
    kuyttendaele
    BRONZE Member
    • Topics Started 0
    • Total Posts 14

    Don’t know what settings are needed on the Essence but on the BV14:

    Settings => Product Integration => Link to other products > <select your Essence>

    After that: your Essence should be be visible in Settings => Sources list.

    Karel.

     

    #8166
    Millemissen
    BRONZE Member
    • Topics Started 7
    • Total Posts 269

    You will also have to go (deep) into the settings of the Essence.

    In the app navigate untill you reach the webinterface of the product.

    ’Configure’ and then ‘Settings’

    There you will see ‘Beolink’ -> ‘Connect to other products’?
    This is where you choose your BV.

    C9E3597A-AF78-49A2-8763-090D00C345F1

    Don’t forget – both products must be on the same home network!

    MM

    #8167
    Sia43
    BRONZE Member
    • Topics Started 13
    • Total Posts 73

    MM, in the picture you’ve attached on Essence settings, there is a setting called “Lydsynkronisering”. Do you know if the setting is for removing potential audio delays with other B&O products?

    #8168
    Millemissen
    BRONZE Member
    • Topics Started 7
    • Total Posts 269
    #8169
    Sia43
    BRONZE Member
    • Topics Started 13
    • Total Posts 73

    MM, thanks for your answer and the link. I assume then that the function isn’t compatible with Mozart based products!

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.