Home Forums Product Discussion & Questions BeoLab DIY Beolab 2500 Wood frets (STLs included)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #53831
    jabaar
    BRONZE Member

      Hi,

      This is my version 3 of the STL-file to print on a 3D-printer so you can make your own wooden frets on your Beolab 2500.
      Print it out and drill holes in it so you can use the original screws to put it on your Beolabs 2500 after removing the fronts. I have tryed to make it to make it reversible.
      You will need 2 printed STL for one speaker and 4 x 18 x 330 mm wooden frets.

      So you need:

      • STL-file
      • A 3D-printer and print 4 stl-files (I printed it with ABS medium)
      • Wood  4 x 18 x 330 mm for every speaker 22
      • Some double-sided tape for the ones on the side.

      I know, my English is not so good. But I want to share. It’s free to use to make your own.

      After downloading remove .pdf.

      Attachments:
      You must be logged in to view attached files.
      #57042
      BramBoerema
      BRONZE Member

        Hello Jabaar,

        I can’t see the file to download the STL-File.

        Where can i find it?

        #57303
        Pranish Bhaskaran
        BRONZE Member

          Hallo Jabaar,

          I am not able to see any attachments.  Would you mind sharing the files, please?

          #57441
          Devon Eijkelenkamp
          BRONZE Member

            Hallo Jabaar,

             

            Ik kan de bestanden helaas niet zien. Kan je ze misschien naar mij sturen?

             

            alvast bedankt!

            mvg,

            Devon

            #58650
            Michael
            FOUNDER Member

              Hi  friend where is the 3d file download please?

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.