Connecting Beosound 9000 via Beolink to Beovision Avant 85

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Home Forums Product Discussion & Questions BeoVision Connecting Beosound 9000 via Beolink to Beovision Avant 85

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42683
    armit
    BRONZE Member
      • Topics Started 1
      • Total Posts 2

      Greetings,

      Please advise how to connect and setup this chain of devices. I connected the Beosound 9000 to the BeoLink Converter NL/ML with the MasterLink cable, but I am not sure which RJ45 ports need to be used to connect the Beolink to the Avant TV set (both sides).

      Second question is about the setup of TV set. What steps of the TV Menu to follow to set-up use of Beosound 9000 via Beolink?

      Many thanks

      #42684
      Millemissen
      BRONZE Member
        • Flensborg————Danmark
        • Topics Started 22
        • Total Posts 1,047

        You should be able to find the answer to your questions (and more) here:
        https://cdn.webshopapp.com/shops/98396/files/334286248/beolink-converter-nlml-ver-14-beomac.pdf

        MM

        #42686
        Carolpa
        BRONZE Member
          • Topics Started 6
          • Total Posts 249

          You should be able to find the answer to your questions (and more) here: https://cdn.webshopapp.com/shops/98396/files/334286248/beolink-converter-nlml-ver-14-beomac.pdf MM

          the difficulty is how to integrate the BS9000 with the Avant and how to start the BS9000 with a remote and/or B&o app. Not all devices are compatibel.

          if the Avant is not an Android version, it is possible to connnect,
          if Armit has another NL-device in his Network the solution would be obvious,
          if an IR eye and speakers are connected to the Beolink converter NL/ML (BLC) it should be possible.

          #42685
          armit
          BRONZE Member
            • Topics Started 1
            • Total Posts 2

            Many thanks! Will give it a try!

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.